topblog Ivoire blogs

21/09/2015

Procedure:using BMW Rheingold ISTA with USB K+D-CAN cable

This post is about how to use BMW Rheingold ISTA with USB K+D-CAN cable, considering USB K+D-CAN cable is much cheaper then BMW ICOM, it is cheap investment.

 

Tools to need:

BMW Rheingold ISTA

USB K+D-CAN cable

 

Step-by-step instruction:

1. Plug your K+D-CAN cable and install drivers. For FTDI based cables use latest drivers.

2. Open "Device Manager", then USB Serial Port properties, go to "Port Settings" tab and click "Advanced…". Change Port Number to "COM9" and latency timer to "1". Confirm configuration via "OK" button.

rheingold-01.jpg

rheingold-02.jpg

3. Open C:EDIABASBINEDIABAS.INI with Notepad and check for "Interface=STD:OBD". In TCP settings set "Port=6801".

rheingold-03.jpg

rheingold-04.jpg

4. Open C:EDIABASBINOBD.IN with Notepad and check for "Port=Com9".

rheingold-05.jpg

5. Connect car with K+D-CAN cable to PC.

6. Now run BMW Rheingold ISTA using shortcut in start menu and wait until it boots, then press settings button.

rheingold-06.jpg

7. Select "VCI Config" tab and "Ediabas standard settings(ediabas.ini)", then "OK".

rheingold-07.jpg

8. Go "Operation", then "Read out vehicle Data" and " Complete Identification".

rheingold-08.jpg

rheingold-09.jpg

rheingold-10.jpg

11:52 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

Les commentaires sont fermés.