topblog Ivoire blogs

22/01/2016

VXDIAG SUBARU SSM-III 2015.10 Free Download

OBD2EXPRESS has released the newest VXDIAG SUBARU SSM-III 2015.10. Come to free download the new SUBARU Selected Monitor III (SSM-III) here!

Free download Subaru_10_2015_DVD_FULL.iso
https://mega.nz/#!BA0hhSTJ!ZdlfudXiluSLbAXcP4axIS-M9-fbx6...

Operation system: Windows xp / win7
Software Version: V2015.10
Language: English, German, Spanish, French, Italian

SUBARU SSM-III-language.jpg
Software feature:
1. Special dual cell processor for automotive, full compliant with all vehicles protocols.
2. Self-determination design for adapters and cables

Device available: VXDIAG SUBARU scanner

SUBARU SSM-III-SCANNER.jpg
Compatibility:
Can Pay to Add Toyota, Honda, Porsche, JLR Software to the Same Device
Fully Compatible with SAE-J2534

Supported models: SUBARU till the 2014 year, both 12V and 24V Gasoline and Diesel Car

With VXDIAG scanner and SSM III software, what can you do?

SUBARU SSM-III-main-menu.jpg
1. All System Diagnosis.
Selecting this item displays on a single screen the fault detect status of all control system control modules for which SSMΙΙΙ diagnosis is supported, and memorized diagnostic codes.
 
2. Each System Check.
Selecting this item makes it possible to select a particular system from among the control systems forwhich SSMΙΙΙ diagnosis is supported, and perform fault diagnosis. 
This item can be used to view input/output data of the system control modules that perform fault diagnosis, memorized diagnostic codes, and other data on the PC display. This menu item is also used after repair work is complete to delete diagnostic codes, to configure control module settings, etc.
 
3. Saved Data Display.
This item can be used to save various data sampled during fault diagnosis operations, and to load data for viewing after work is complete.
 
4. Immobilizer.
This item performs immobilizer registration.
 
5. Reprogram.
This item performs reprogramming of the control module.
 
6. Read CF application measurement data.
This item performs reading stand alone measurement data saved in a CF card to hard disk of your PC.
 
7. Convert/Save measurement data on driving recorder.
Loads data sampled on the driving recorder to the PC from the CF card, and converts and saves that data.
 
8. Oscilloscope.
After attaching the optional pulse/analog cartridge to SDI, connect the pulse/analog box to the SDI and using pulse/analog probe to perform analog sampling.

http://www.foxwelltool.com

09:51 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

20/01/2016

Install SDP3 V2.24 for VCI 2 VCI 3 on Win 7

Scania truck diagnosis SDP V2.24 has been released. Here is all about the new SDP3 V2.24.1 for VCI 2 or VCI 3..

SDP3 2.24 free download:
http://www.chinaautodiag.com/html/scania-vci-3-sdp3-v224-...

Computer requirement:
Windows 7 32 bit

Compatible device:
VCI 2
VCI 3 WIFI

Installation instruction:
Open Computer>>DVD Drive (E:) sdp2.24, to copy the zip files “emulador sdp3_2.24” and “SDP3_2_24.1” to Desktop.

Install Adobe Reader 9.2
Open “AdbeRdr9204_en_US” in DVD Drive (E:) sdp2.24.
Click Finish when successfully install Adobe Reader 9.2.

Install .NET Framework4.5.1
Open “.NET Framework4.5.1(if need)” in DVD Drive (E:) sdp2.24.
Tick on “I have read....terms”, and click Install.
Installing .NET Framework4.5.1....
Click Finish when successfully install .NET Framework4.5.1

Open installation instruction
Open the text document “read me” in DVD Drive (E:) sdp2.24. Instruction on installation of SDP3 will be read there.

SDP3 V2.24 for VCI 2 VCI 3-1.jpg
Install SDP3 2.24.1
Extract “emulador sdp3_2.24” and “SDP3_2_24.1” on Desktop.
Open the extracted folder “SDP3_2_24.1” >>SDP3_2_24.1.
Click Next.
Click I Agree.
Click Install after choosing install location.
Make sure that the VCI unit and the SDP3 USB key are disconnected from the computer before continuing with this installation. And click OK.
Installing SDP3 2.24.1...
Click Finish after installing SDP3 2.24.1 on your PC.

SDP3 V2.24 for VCI 2 VCI 3-2.jpg
Install Sentiel Runtime
Open the extracted folder “emulador sdp3_2.24” on Desktop>>emulador sdp3>>HASP driver>>HASP DRIVER FOR W7>>Sentinel_LDK_Run-time_setup>>HASPUserSetup.
Click Next.
Tick on “I accept...agreement” and click Next.
Click Next.
Installing...
Click Finish.

Add hardware
Right click Computer for Manage.
Select Device Manage>>123-PC.
Then go to the menu bar to select Action>>Add legacy hardware.
Click Next.
Tick on “Install the hardware...(Advanced)”, then click Next.
Select Common hardware type: System device, click Next.
Click Have Disk...
Click Browse... Select Desktop>>emulador sdp3_2.24>>emulador sdp3>>HL-Emu>>vusb, click Open.
Click OK.
Click Next after selection of the device driver.
Click Next to install the new hardware.
(If you meet with Windows Security, it’s normal and please click Install this driver software anyway).
Installing...
Click Finish after installation of Virtual Usb Bus Enumerator.
Close Computer Management.

Confirm 2 .reg files
Open the folder “emulador sdp3_2.24” on Desktop>>emulador sdp3, to double click registration entries “1” for Merge.
Click Yes to continue.
Click OK.
Double click registration entries “2” for Merge.
Click Yes to continue.
Click OK.

Run install.cmd
Open the folder “emulador sdp3_2.24” on Desktop>>emulador sdp3>>Multikey>>Multikey 32 bit>>install.
(If you meet with Windows Security, it’s normal and please click Install this driver software anyway).

Copy new fix files
Open the folder “emulador sdp3_2.24” on Desktop>>emulador sdp3>>new fix, to copy all the files.
Right click “SDP3” on Desktop for Properties.
Click Open File Location, then paste what you copied just now in Computer/lock disk C:/Program Files/Scania/SDP3.
Tick on “Do this for the next 1 conflicts”. Click Copy and Replace.
Close the two interface.

Open the folder “emulador sdp3_2.24” on Desktop>>emulador sdp3>>Scania USB Key.
Click Start Restore.
Installing...
Click Yes to restore the driver now.
Always click Yes, when you meet warning information “... Do you want to continue”.
(If you meet with Windows Security, it’s normal and please click Install this driver software anyway).
Click Finish and Yes to restart your computer.

SDP3 V2.24 for VCI 2 VCI 3-3.jpg
Right click Computer for Manage.
Select Device Manager>>123-PC>>CAN Hardware(Kvaser)>>Scania VCI2, then close it.

Run SDP3
After finishing steps above, you can open “SDP3” on Desktop.
Warning: click Yes.

SDP3 V2.24 for VCI 2 VCI 3-4.jpg
Top 3 reasons to get SCANIA VCI 2:
1.work with latest Scania trucks, buses and other heavy vehicles.
2.Updatable
3.VCI2 supports the earlier systems in P, R, T series and K, N series vehicles and industrial and marine engines.

Top 3 reasons to choose VCI 3 Scania:
1. Latest software V2.24 (For WIN7 32bit only)
2. High-speed WIFI Wireless connection enable you diagnose vehicles more freely
You can also choose to use USB port connection for diagnose.
3. Support all trucks, buses and engines manufactured after 2004.

08:46 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

18/01/2016

VVDI MB BGA TOOL latest version V2.0.6 free download

Original Xhorse V2.0.6 VVDI MB BGA Tool is used for key reading and writing,EIS tools,password calculation,key file preparing,ESL tools,ECU/Gearbox renew and many special functions.

Software: V2.0.6
Firmware: V2.0.6
Attention: For software which is older than V2.0.6, you need to update device to firmware v2.0.6, software v2.0.6. Tower version don't support password calculation

VVDI MB TOOL 2.0.6 software download link
https://mega.nz/#!CpoyjQzD!yDUD-GGwARcd3l2kIaM_705Eh-2ob4...

VVDI MB BGA TOOL V2.0.6 (2016-1-16)
*** Require firmware V2.0.6
************************************************** **********************
===== BENZ V2.0.6 =====
1. Attention: All user update device to firmware v2.0.6, software v2.0.6, the lower version dont support password calculation
2. User manual v1.1 released, overview v1.2 released
3. Add support for disable key
4. Fix bug for test W164, W221 EIS status
5. Fix bug for write EIS data
6. Bugfix

VVDI MB BGA tool software display:

vvdi-mb-bga-tool-1.jpg

vvdi-mb-bga-tool-2.jpg

VVDI Benz BGA tool Feedback:
1. I tested password from 212 new model super,good tool, need to pay 2 tokens ,it will take 10 min all ok .

2. Do you have see video of this tool? They say can do all key lost on w212. No tool can do it even Mehaco or nec pro51.
w212 eis on video, sure it can.. mehaco/mercedesinstrument can do all keys lost on w212.. the option is availible a few months.

3. Q:i tes read data with obd2 210 k line working and 204 car read with obd 2
but 211 not read with obd2 cable connect
16 12v
4+5 GND
14 CAN_L
6 CAN_H
pin 1 : ESL 1
pin 2 : GND
pin 3 : +12V (30)
pin 5 : CAN L (White)
pin 6 : CAN H (Green)
pin 7 : CAN L
pin 8 : CAN H
CAN ANY ONE TEST
A:Read eis via obd for W164, W169, W211, W209, require gateway connected

10:39 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)