topblog Ivoire blogs

15/03/2016

Firmware 1.59 Opcom OP-Com 2012V setup instruction

Here is the step-by-step instruction on how to setup Firmware 1.59 Opcom OP-Com 2012V software.

Software: V2012

Firmware: V1.59

Language: English. (If you need german, please choose SP12 OPCOM German version.)


How to setup Firmware 1.59 Opcom OP-Com 2012V software:

1.create a folder named [op-com] at the desktop.

op-com-setup-instruction-1

2.open [op-com] CD.

op-com-setup-instruction-2

3.set up “op-com EN exe”.

op-com-setup-instruction-3

op-com-setup-instruction-4

4. Destination folder (Please select the folder, in which OP-COM will be installed), here you select the blank folder “op-com” you just now created in the desktop.

op-com-setup-instruction-5

op-com-setup-instruction-6

5.open “op-com” folder in your desktop.

op-com-setup-instruction-7

op-com-setup-instruction-8

6. Open the CD and copy the “OPCOM090714_EN_Crack.exe”, then paste them into the folder of “op-com” in the desktop.

op-com-setup-instruction-9

7 .connect op-com interfaces to your PC, then it will tell you to setup op-com driver, please select the second option and click “Next”.

op-com-setup-instruction-10

8, select the destination folder for driver setup.

op-com-setup-instruction-11

op-com-setup-instruction-12

op-com-setup-instruction-13

op-com-setup-instruction-14

op-com-setup-instruction-15

op-com-setup-instruction-16

9. finish setup driver, now check op-com driver location “My computer=management= device management=USB”, if op-com driver location shows as follows, that means it is ok now.

op-com-setup-instruction-17

10. Open “OPCOM090714_EN_Crack.exe” under the folder of “op-com” on the desktop, ready to activate software. Com not found, because the software is not activated.

op-com-setup-instruction-18

11.Click “Settings”.

op-com-setup-instruction-19

12.Click “test interface”, run activation program.

op-com-setup-instruction-20

13.activation program runs well and get Serial Number, “Save Config”, “close” Serial Number.

op-com-setup-instruction-21

14.Select “diagnostics”.

op-com-setup-instruction-22

op-com-setup-instruction-23

15.select protocol to diagnosis.

op-com-setup-instruction-24

16.pass the protocol, select “diagnose ECM”.

op-com-setup-instruction-25

17.Read fault codes.

op-com-setup-instruction-26

op-com-setup-instruction-27

More information:http://www.obdexpress.co.uk/wholesale/opcom-op-com-2010-v...

06:51 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

Les commentaires sont fermés.