topblog Ivoire blogs

31/05/2016

v8/x6 key cutting machine user manual free download

Automatic V8/X6 Key Cutting Machine can make new keys without original key. Latest version,support keys for different car brands.

v8/x6 key cutting machine user manual

Language :English + Italian + Portuguese + Spanish / Turkish + English

V8/X6 key Cutting Machine user instruction display in pictures:

V8X6 key cutting machine 1.jpg

V8X6 key cutting machine 2.jpg

V8X6 key cutting machine 3.jpg

 

V8X6 key cutting machine 4.jpg

V8X6 key cutting machine 5.jpg

V8X6 key cutting machine 6.jpg

V8X6 key cutting machine 7.jpg

V8X6 key cutting machine 8.jpg

V8X6 key cutting machine 9.jpg

V8X6 key cutting machine 10.jpg

V8X6 key cutting machine 11.jpg

V8X6 key cutting machine 12.jpg

What situation you can make keys with this V8/X6 key cutter?
1) You have the original key and make a new key:
When you start this machine, you will see the menu, just follow the menu prompt to enter the number to read key teeth step by step. Then you will get the new key
2) You lost all keys.
When you lost all original keys, enter the appropriate number of head lock, then follow the menu prompt to make new key.
3) Mainly used have the key with keyless lost data with the key.

www.obdexpress.co.uk

10:55 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

30/05/2016

Magic Wand 4C 4D Transponder Chip Gnerator User Manual

Magic Wand 4C 4D Transponder chip generator comes out, which not only generate 4D63, 83 40bit and 83 80bit chip but also is used to generate 4C chips original 4D70 blank Chip to 4D small capacity chips. Well, there is a detailed introduction of Magic Wand.

What is Magic Wand 4C 4D?
Power supply: Above 5v 1.5a usb charger, please charge the Magic Wand using Android phone USB cable.
PS: You had better not use the sub-standard power supply because it will influence the function of magic wand ,leading to the magic WAND’s wrong.

Magic-Wand-4C-4D-3.png

Magic-Wand-4C-4D-1.png
Ford/Mazda immobilizer chips are 3 types available:
1. 4D63 (40bit/DST40) small capacity.
2. 83 (40bit/ DST40) small capacity.
3. 83 (80bit/DST80) big capacity.

How to use Magic Wand?


a usages description of key button
Read
This button is used for reading chip. After you put the chip into the slot, press “Read” button and get the reading result. If it doesn’t succeed to read, the red indicator will continue flashing. While after reading successfully it will display, chip ID and the green indicator will keep flashing. At this time it is ready to copy, take out the chip and substitute the special chip for Magic WAND, press “Write” button and complete copying, after that it will display chip ID ,at the same time the green indicator will continue flashing, if it fails to copy, the red indicator will keep flashing.

Write ( This button is used to generate and copy chip)
Generate Chip: Put the chip into the slot , press the chip ID you want to generate, press “Write” button to get the results, the green indicator will keep flashing and display chip ID. In contrast, if the red indictor flashes it means reading is finished, maybe you put an error chip or the chip doesn’t match with the device.
Copy: you need to read out the chip ID before to copy, after it read out successfully you will get the chip ID, just press “Write” to finish copying. While if the red indicator flashes it means the chip doesn’t match with the device.

NOTES:when you add the key, you have to put the Magic Wand close to the ignition coil and the key go through the hole of Magic Wand, then follow the key programmer prompt to finish.
1.Put the original 4D70 blank chip into the chip slot.
2.Press the No. buttons 8 and 3, then press “Write” button, the green indicator will flash and means copy successfully.
3.Put the chip back into the key shell, then take it to the car to add key work together with key programmer.

Magic-Wand-4C-4D-2.png

What is Magic Wand 4C 4D function?
1: transform original 4D transponder into special
transponder(61.62.65.66.67.68.....)
2: Copy transponder (61.62.63.65.66.67.68)
4D Magic Wand is an progressive device for locksmith.
It not only work independently but work with handphone & computer.
Update constantly , work on special material.
It can settle many problems for locksmiths.
Magic Wand is needed by Beginner and exprienced locksmith.

Chip ID and the applicable car models
4C chip: old Toyota.  72G chip: Toyota G.  82G chip: Subaru G.  D68 chip: Daihatsu.  72DG: Daihatsu G. 60 chip: oldExcelle/ old Nissan/ old Mondeo. 61 chip: Mitsubishi. 62 chip: Subaru. 63 chip: Ford/Mazda. 64 chip: Chrysler/ Jeep. 65 chip: Suzuki. 66 chip: Suzuki. 67 chip: Toyota/Lexus. 68 chip: Toyota/Lexus. B9 chip Toyota Crown. 69 chip: Yamaha Motorcycle. 6A chip: Kawasaki Kawasaki. 6B chip: Suzuki Motorcycle.

Mileageprogrammer.com

09:40 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

27/05/2016

Multilanguage Scania VCI3 V2.24 Scanner programmer Wifi Tested OK

New look Scania VCI3 V2.24 Scanner programmer wifi is tested ok to perform diagnostic and programming function as the old Scania vci3, what an exciting is its price drop down for only €198.2. Besides VCI3 V2.24 is tested ok when communicating via both WIFI and wired USB cable. Moreover, it is multi-language optional.

Following pictures are what I tested ok, I verified it can communicate with my ECU and to read fault codes then I tried to program and save data. More advanced function are to be tried in the following days.

Tested ok when connect to truck ECU.

scania vci3 connect to ecu-01.jpg
Tested ok on reading fault codes.

scania vci3 fault code-02.jpg
Tested ok on programming and save data.

scania vci3 programming-03.jpg
Scania VCI3 V2.24 device I get:

vci 3 full package.jpg
As you see, it is lightweight aluminum housing with IP67 protection and polyurethane cables for extreme conditions.

Following parts are more details on Scania VCI3 V2.24
Software version: V2.24

Language:
English, German, Spanish, French, Japanese, Dutch, Polish, Portuguese, Swedish, Norwegian, Suomi, Turkish, Italian, Czech, Russian, Chinese.

What Scania VCI3 V2.24 can do and what truck makes to work with:
Support full maintenance for all Scania trucks, buses, other heavy vehicles or heavy duty engines made by Scania after 2004, adapter works in conjunction with software SDP-3.
Support all Scania diagnostic systems based on CAN network.
which produces the corporation SCANIA.
Before Scania vehicles from 1995-2004, please choose SCANIA VCI1.
Encryption protocols: WPA2/WPA/WEP128/WEP64

Communication/Connect Method:
Options: Wifi wireless connection or USB connector / wired connection
Parameter: WLAN version 802.11b/g. USB 2.0 (compatible with USB 1.1)

How to establish Wifi for Scania VCI-3:
Connect Scania VCI 3 with your truck. Open the computer WIFI. Search VCI 3 WIFI, click connect.

scania-vci-3-vci3-scanner-wifi-wireless-diagnostic-tool-wifi-1.jpg

scania-vci-3-vci3-scanner-wifi-wireless-diagnostic-tool-wifi-2.jpg

scania-vci-3-vci3-scanner-wifi-wireless-diagnostic-tool-wifi-3.jpg

scania-vci-3-vci3-scanner-wifi-wireless-diagnostic-tool-wifi-4.jpg

scania-vci-3-vci3-scanner-wifi-wireless-diagnostic-tool-wifi-5.jpg

scania-vci-3-vci3-scanner-wifi-wireless-diagnostic-tool-wifi-6.jpg

http://www.mileageprogrammer.com/how-to-register-digimast...