topblog Ivoire blogs


How to update Condor XC-Mini v4.0.1 online

v4.0.1 updated! Here, free download Condor XC-Mini 4.0.1 software, and then update your Condor key cutting machine to the newest version!


Here you go.


  1. Connect iKeycutter Condor XC-MINIto the PC with a USB cable.

2- Turn on the Mini Condor, check old software version; it’s version


3- Download Condor Mini V4.0.1 Update tool for both S/N starting with KM03 and KM02.

Condor Mini V4.0.1Application can be downloaded on the Mega server:



4- Extract then Install & Run, then go to Key Data Customize Tool menu, click on “Update”


5- Select Condor mini key cutting machine serial number, KM02 or KM03


6- Select newest software 4.0.1, press on “Update Online”


It will take a few minutes, so please wait and DO NOT turn off or disconnect mini Condor during the procedure.


7- Condor xc mini update 4.0.1 is updatedsuccessfully


Condor-XC-Mini-v4.0.1-download-update-6 Condor-XC-Mini-v4.0.1-download-update-7

Now, you can try new features of Xhorse Condor mini 4.0.1


+decode universal key decode

+try M2-D

+test motor sensors

+try Main Interface-Key Duplication-Universal Type

+work with both SN KM02/KM03 machines


Besides, some bugs in the old version have been fixed in the ver. 4.0.1 Condor mini.


*Fix machine may crash error problem

*Fix HU49 key decode error

*Fix HU66 cutting speed issue

*Fix BW6 cutting error

*Fix TBE1 cutting error


1.New update for both SN KM02/KM03 machines

2.New function: Main Interface-Key Duplication-Universal Type

3.Universal Type support decode/cutting parts of home & vehicle keys

4.Please keep the whole key clean and conductivity good(ensure without dust/oil)

5.For one side key(thickness of whole key usually 1.5mm or 2.00mm) please add a shimsiness card under the key,ensure the whole key thickness should more than 3mm





2017 Foxwell NT510 BMW Review

Have had good success with BMW. And this is a review of Foxwell NT510 BMW scan tool.


Foxwell_BMW_Function_List.pdf  (2,089.7K)

2010 BMW 335i

Can code new injectors in the BMW 2010 335i


2011 E90 328i LCI

Can Re-program the Speed Governor on 2011 e90 328i LCI model, vin WBAPH7C52BE852716…please note: Performance software is required to manipulate top speed limiters.


E92 M3

Can perform a throttle actuator adaptation on an e92 M3 after replacment


2010 BMW e88:

it support reprogramming of injector values and Engine idol speeds and it can be used on it,so far ,everything is OK,


2008 BMW E93:

register a new battery- SUCCESS


2009 535i N54

Allow to alignment and calibrate fuel injectors on a 2009 535i N54 engine


2003 e46 325xi

Can read codes from a transmission control unit (TCU) on a 2003 e46 325xi.


2006 BMW X3:

able to find 2 misfires because of bad plugs.


2009 BMW z4:

able to diagnose and find bad HAL sensors stopping the roof from retracting


2009 bmw 335i (American):

Managed to do battery registration


BMW X5 E53:

Used NT510 scanner to get all of the air out of ABS block–> OK


BMW E39 M5(2003)

X5 E53 4.6is (2003)

540iT (1999):

I bit the bullet and ordered one also along with a Bentley manual. I’ve got 3 BMWs E39 M5(2003), X5 E53 4.6is (2003), and 540iT (1999). Because it has specific BMW codes it seams worth the investment and well beyond a peak code reader.


BMW E90:

Bi-directional control tests and oil light reset… no issues


2009 BMW 335 Diesel E90

all functions in the list are tested


F82 M4

Can can provide sensor data from the oil level system on an F82 M4, The M4 apparently can only read the oil level with the iDrive, which we plan on permanently removing for non-street use.


e90 328i

Can register a battery to an e90 328i.


2007 328i Coupe

Can determine which wheel speed sensor is bad on 2007 328i Coupe.


2004 X3

NT510 can read and reset airbag service light. I have an intermittent airbag service light on a 2004 X3 that BMW service cannot track down as it clears from memory before I can get it in for service.


09 BMW E82 135

Have the ability on the 09 BMW E82 135 to scan for ghost codes, and any other stored codes. For example, example it will read codes that you did not get a scanner connected fast enough while the check engine light was on and it goes off before you know what the code actually was.



capable of functioning as a universal OBDII reader for all makes in addition to it’s BMW/Mini/RR Specific functions.


2012 mini cooper 

Can work with a 2012 mini cooper countryman s all 4.


E36 OBD1

Have E36 OBD1, for OBD1 cars will require adapter ES2992111 to perform function, Available features will be dependent upon the cars abilities. Not all features are compatible with all models.


E39 M5 2000

Communicates via the obdII plug in the cabin on the E39 M5 2000, no extra adapters needed.


 read and reset O2 sensor 

can read and reset O2 sensor readiness codes but will not code them off permanently.


nt510 update

Updates can be skipped; sequential installation of updates is not required.


2011 335d 

Can reset “Right/Left Cornering light” warnings on 2011 335d caused by after-market halo installation. To properly clear the error code you need halos with proper  resistance, this will cause the car’s computer to automatically reset the warnings.


2011 335i N55

All functions are supported across the E93 series on a 2011 335i N55.


Mini Cooper S R56

Ok to reset the Airbag/seatbelt light on Mini Cooper S R56.


 2012 BMW F10

Ok to modulate the e-parking brake on a 2012 BMW F10 to enable a rear brake job with rotor replacement.


 e46 m3

Can do VANOS test, Idle Sync etc for e46 m3.


2008-011 m3

Can activate the abs unit in order to bleed it on a 2008-011 m3.


BMW and mini cooper

Can do battery registrations and coding on BMW and mini cooper.


08-2011 M3

Be able to code a new battery on 08-2011 M3’s.


early E36 

To make NT510 is compatible with the early E36 (The car has ads modules for Abs and srs), need the 20 pin adapter ES2992111.


e46 m3

Can reset the adaptations needed after an e46 m3 smg clutch change.



Enable auto rear window defogger for GM5 module on BMW E46. E46 general module coding is possible.


2002 745

Can perform the dynamic drive reset for a 2002 745.


BMW e83

Reset the transfer case oil wear indicator on BMW e83.


2008 BMW 135i

Can code injectors and new battery on 2008 BMW 135i.


bmw f32

Able to reset transfer case adaptations after transfer case fluid change in an F32.


Mini Cooper R56

Can code for Xenon headlight conversions and also for activating *Sirius Retrofit Enable Code (FSC)* for Mini Cooper R56’s, but only some models not all.


bmw z4m roadster 2007 – FAILED

NT510 scanner cannot remove the top rpm limiter on a bmw z4m roadster 2007, performance tuning software is required to remove top speed limiters.


2005 BMW x5 4.4i e53 – FAILED

– Can’t retract the calipers on a 2005 BMW x5 4.4i e53.  The E53 does not have electronically controlled calipers. On the E53 you’ll manually compress the pistons after removing the caliper, please see the following tools to assist you with this task, ES8211 ES9747 ES2153340


display the sensor’s output

Be able to display the sensor’s output if this function is registered by the car’s dme.


pull codes from the SRS

Can pull codes from the SRS system and reset the light once all issues are corrected


code LCM, GM

Allow coding of the LCM and GM on BMW vehicles.


program new ABS

Have the ability to program new ABS components to current vehicle.


bmw specific

Can read BMW Specific (Shadow/Hidden Codes)


reset sas

Able to reset the (sas) steering angle sensor


change line codes

Allow for line code changes when programming car options, such as automatic door locking.


recode&program modules

Module recoding and programming is possible with this tool.


register new tire pressure

Can register new tire pressure monitoring sensors.


TPMS receiver..depends on the vehicle

Whether NT510 can read TPMS codes or not (Specifically to tell which TPMS receiver is malfunctioning), it depends on the vehicle,If your car has the ability to provide this information the tool will be able to pull this data.


computer and system for software

The included software is not native to Mac computers.

win10 is compatible.



(more foxwell nt510 reviews will updated here….)



07:57 Publié dans Blog, Shopping | Tags : foxwell nt510 | Lien permanent | Commentaires (0)


OBDSTAR ET-108 USB Inspection Camera

New arrive OBDSTAR ET-108 ET108 USB Inspection Camera, for sale €45.99 free shipping.

OBDSTAR ET-108 adopts flexible waterproof tube with HD camera to check the inner car situation which can’t reached by human eyes, playing an important role in engine clean and maintenance.

Using an ET-108 device, car problems can be quickly found and the machine damage in disassembly can be largely avoided.


OBDSTAR ET108 compare with Autel MaxiVideo MV105:

Same: Share the same function


1) OBDSTAR ET108 price €45.99 free shipping worldwide;

Autel MaxiVideo MV105 8.5mm price €42 / 5.5mm price €60 (out of stock)

2) built in with 6 pieces of dimmable LED lights

3) 4 kinds of probes to choose


Can OBDSTAR ET108 work alone?

Confirmed: OBDSTAR ET108 can work together with OBDSTAR X300 DP and OBDSTAR DP PAD Tablet. (for how to use, skip to the next paragraph)

Under Testing: OBDSTAR engineer is now testing APP, and soon OBDSTAR ET108 can work alone by running app on windows computer / PC, then it will become a plug and play Inspection Camera.

Under development: soon, OBDSTAR engineer will test ET108 on other brands tablet instead of only OBDSTAR pad .


How to use OBDSTAR ET108 together with OBDSTAR X300 DP and OBDSTAR DP PAD Tablet?

Generally speaking, it is easy to use OBDSTAR ET108.

But here some tips to follow.

  1. To update X300 DP or X300 PRO3, after complete update, you will find a new option “Endoscope” (Shown as below picture)
  2. Click “Yes” to download software.

x300 dp endoscope

  1. Plug the USB end of OBDSTAR ET108 into the X300 DP or X300 PRO3 Key Master (there is a USB port above the Tablet). 

More info

OBDSTAR ET108 package pictures:

obdstar-et-108-usb-inspection-camera-pic-4obdstar-et108obdstar-et-108-usb-inspection-camera-pic-3 - 副本

OBDSTAR ET108 specification:

Len O.D.(mm): 7.0mm

Sensor Size: 1/12″

Resolution: 640*480

Frame Rate: 30fps

View Angle: 60°

Focus Distance:30-80mm

White Comparison: Automatic

Exposure Light: Automatic

Dimmable LED: 6pcs

Operating Temperature:0℃ to 60℃

Tube O.D.(mm): 6.4mm

Tube Length:800mm

Bending Radius: 50mm

USB Cable Length: 620mm

USB Port: USB 1.1/2.0

Power Support: 5V DC via USB

Photo Format: JPEG

Video Format: AVI

Mirror/Magnet/Hook: Yes