topblog Ivoire blogs


How to install INSITE on Cummins Inline 5 data link?

Step by step procedure on installing INSITE on Cummins Inline 5 data link truck diagnostic adapter.



  1. Exit all anti-virus software programs

2.Setup Cummins 8.2.0 pro/lite version software

How to Install Activate Cummins Insite Pro and Lite



Step 1: setup Inline 5 driver 

Any of windows 7 8 10 is okay, I take Windows 7 32-bit for example.



Open software CD

Open INSITE.7_6_2.rar-> Software folder->INSITE 5 Drivers

insite-8-2-0-184-on-cummins-inline-5-data-link-02 insite-8-2-0-184-on-cummins-inline-5-data-link-03


Copy Inline Setup- 32 Bit.exe and paste it to the desktop

For 64-bit system, you copy Inline Setup- 64 Bit.exe to desktop



Setup the adapter driver, I use Cummins Inline5 data link (Inline 6, Nexiq or other adapters are working too)

Run Inline Setup-32 Bit on desktop as administrator 



Click on NEXT



Accept the windows security warning to setup driver software



Tick "Launch Inline 4/5 Reflash Tool" and click on Finish

Delete Inline Setup-32 Bit on desktop

Device driver has been successfully installed

insite-8-2-0-184-on-cummins-inline-5-data-link-08 insite-8-2-0-184-on-cummins-inline-5-data-link-09


Open Computer->Manager->Device Manager->Universal Serial Bus Controller to check if the driver establishes a good communication with the computer.



Step 2: Add Inline5 adapter to INSITE 8.2.0

Open INSITE pro or lite version software on desktop



Select "Add New" option on the middle of the bottom tool bar



Click on "Next" to setup ECU Connection Wizard



Choose RP1210 adapters, click on Next



Choose Vendor, Adapter INLINR 5 USB and protocol Auto detect, click on Next



Click on Next


Tick both 2 options and click on Finish

Again software will prompt to install ECU connection wizard, click on NEXT

Do the same setting as above, but this time we choose protocol J1708



Click on Finish

Do the setting again, this time we add protocol J1939


Click on Finish and cancel ECU connection wizard interface


Please add the corresponding adapter in the insite software



Choose "INLINES USB (Auto Detect) Connection" in the middle of bottom tool bar



Click on the "Connect" button to connect to ECM

Now you are ready to use the software to read fault code, manage data logger, do calibration etc

insite-8-2-0-184-on-cummins-inline-5-data-link-22 insite-8-2-0-184-on-cummins-inline-5-data-link-23 insite-8-2-0-184-on-cummins-inline-5-data-link-24




10:54 Publié dans Blog | Tags : cummins inline 5 | Lien permanent | Commentaires (0)


VVDI MB TOOL Token Free News

Dear Xhorse Users From Western Christmas

to traditional Chinese New Year.Xhorse new year carnival is coming.The latest version VVDI MB TOOL already improved online calculation(calculation time less than 20 seconds,one time success rate 99%)From 25th,December 2017 to 25th,February 2018,during this period all VVDI MB TOOL users can enjoy online calculation for free,token free for all users

vvd mb tool


SDconnect C4 DAS Fault (1.2)-2.503.9901: Solved & Worked again

Phingoc in trouble:

The laptop is a Dell D630 with a china SDconnect C4.

Xentry 03/2012

DAS 03/2012

It was all working fine last i used the machine.

So.. I connect the MUX to the car (smart 451), and then the lanwire to the mux and computer. Then i turn on the ignition.

In xentry i choose Smart -> 451 -> Diagnostic -> Das opens

in das: Identify car by control unit. After a few seconds some update thing appears and disappears followed by an error.(see att.) Fault (1.2)-2.503.9901. Cannot connect to car.


Doesnt work with wire or wireless.

Please help me.


Rocinante Wrote: 

Delete the 3 “update” folders in C:program filesSDconnect toolkit (or rename them).. then perform a repair of your SDNetControl by pressing StartProgramsServiceSetup SDNetControl .. it will start up and ask what you want to do, select repair.. let it do its thing and then go back and delete/rename the update folders in C:program filesSDconnect toolkit then REBOOT when its done… that should get you up and running.. it is VERY important to REBOOT after deleting the update folders!!!


Phingoc feedback:

Thank you verry much! Big Grin that fixed the whole problem.


  1. start laptop
  2. Rename update folders
  3. Run setup SdNetControl
  4. The “repair” option wasnt displayed, but it went straight into instalation. No options, but it went automaticaly to instalation :S
  5. Reboot after instalation

Re-delete or Rename update folders after running SDNC setup

  1. Delete setings from the MUX
  2. Reconfigure SDconnect
  3. Start Xentry/das and it worked straight away. Big Grin

10:52 Publié dans Blog | Lien permanent | Commentaires (0)