topblog Ivoire blogs

11/04/2018

KTag SSM Cable Pinout for PCR2.1 Read/Write

Have anybody test SSM cable cable with the ktag clone for PCR2.1?

Yep. Work good with KTAG original and HQ clone. SSM tested more times, works perfectly. Read and write in BSL on table without unlock after read password with SSM cable.

 

PCR2.1 full flash VERY IMPORTANT!!!

 

Pinout cable SSM 144300T111 (INFINEON TRICORE ECU PCR2.1 CABLE)

ktag-pinout-cable-SSM 144300T111-1 ktag-pinout-cable-SSM 144300T111-2 ktag-pinout-cable-SSM 144300T111-3

Already DONE

ktag-pcr2.1-1 ktag-pcr2.1-2

Note that you need ktag HQ clone or original, open ecu and prepare Eeprom for cloning ECU.

 

If you fail, have a try with Fgtech 4 (clone should be okay)

Date Software revisions....01/18 OBD driver CAN for Siemens Simos PCR2.1 VAG Virtual Read/Write, Recovery, Checksum, Unlock by OBD

 

On a side note, ksuite tools (kess or ktag) seem to

be more stable than fgtech on pcr but work too

 

On ksuite tools , you can’t read or write with ktag , only unlock . (alientech need to work on it…)

with kess it’s ok , BUT , you can’t use the tricore module !

The trick to get communication error free on both fgtech and kess cable is to use a strong external psu .

good psu and obd home made bench cable , remove tricore module on kess v2 = 100% tested bench flashing solution for pcr2.1 .

 

Good luck!

 

 

http://blog.obdexpress.co.uk/2018/04/09/pinout-ktag-ssm-c...

Écrire un commentaire