topblog Ivoire blogs

14/06/2018

wiTech MicroPod 2 V17.04.27 is not registered, how to solve?

This post offer the solution to clone wiTech MicroPod 2 V17.04.27 Chrysler diagnostic tool is not registered

 

Issue:

"Registration is needed

Device with serial number*** is not registered. Please check the knowledge

base to determine how to register a device"

wiTech MicroPod 2 V17.04.27 is not registered-01

 

Working Solution :

  1. Right click Witech Diagnostic Application-> Properties->Open file location

wiTech MicroPod 2 V17.04.27 is not registered-02

 

  1. Enter C:/Program Files (x86)/DCC Tools/wiTECH/client. Open app-config text file

wiTech MicroPod 2 V17.04.27 is not registered-03

 

3.Find out "VerificationHash", then the followed "Value", change the first number to any value i.e change 6 to any number between 1-9.

Then save the text file. (Very important!!!)

wiTech MicroPod 2 V17.04.27 is not registered-04

 

Run Witech Micropod II software.

If it still display message" an internal registration error has occurred ", just close this windows to ignore it.

wiTech MicroPod 2 V17.04.27 is not registered-05

 

Tick off " Offline work" at the left corner of screen, then you don't need to login.

Click on "Finish".

wiTech MicroPod 2 V17.04.27 is not registered-06

 

Problem Fixed.

Go on using wiTech MicroPod 2 to diagnose or program Chrysler.

This solution is offered by www.obd2eshop.com engineer.

Les commentaires sont fermés.