topblog Ivoire blogs


OBD2Eshop is a good store for GM Tech2 Scanner

This was my order of GM Tech2 Diagnostic Scanner with TIS2000 Software:

Order Date: Aug 26, 2018

Ship to: United States

This is how GM Tech2 looks out of the box:


GM Tech2 Scanner


Turned on:

GM Tech2 Scanner



The following 3 paragraphs are what I mail to OBD2Eshop:

I tested device and it works well. Problem is the screen. I believe for return I would have to send back and pay for shipping. This would take a long time and I have work to do using the tool.

gm tech  2 screen

Right now I am using a laptop connected so I can see the full screen


I would rather do partial refund or try replacing the screen myself.

Will you do a partial refund?

Can you send or help me find a replacement screen?

I have been happy so far with OBD2eShop so far. The price, service and shipping speed was good.

I hope we can reach a positive solution.


Finally, OBD2eShop ship me a new package.

Just want to let you know, I finally took the time to really test out the replacement I was sent and it appears to work perfectly.


One small issue is that I was sent a GM PC Card and not a Saab one. I tried to write the GM Card in my laptop to Saab software but I ended up damaging the card. It was my fault. I know that I could have contacted you for help and you would have taken care of me.


I was able to find another Saab Card and get it working so I am very happy now. I do not need any more help.


Thank you so much for your above and beyond service. I think very highly of your store.

<div style=

11:51 Publié dans Blog | Tags : lonsdor k518ise | Lien permanent | Commentaires (0)

How To Use Lonsdor K518ISE KPROG Adapter?

KPROG-2 adapter for Lonsdor K518ISE Key Programmer support programming MCU and EEPROM on ECU circuit board.

Lonsdor K518ISE KPROG Adapter


Here is the user tip of Lonsdor K518ISE KPROG Adapter ,we made two part:


Part1: How to Bind Lonsdor K518ISE KPROG Adapter

Part2: How to upgrade Lonsdor K518ise adapter kernel

In detail…

Part1: How to Bind Lonsdor K518ISE KPROG Adapter

The Lonsdor K518ISE KPROG adapter is specialized for part of Volvo car series and the new Maserati

for the time being, the more car models supported will keep updating.  And the KPROG adapter must be bound to K518ISE before using, So how to blind K518ise KPROG adapter? Please follow the 5 steps below:

Step 1. Connect adapter to K518ISE with mainline

Step 2. Connect K518ISE with 12V power supply

Step 3. Enter into “Setting”

Step 4. Click “Bind adapter”

Step 5. Click “OK” to complete

After Bind KPROG adapter, you can use K518ise to do key programming.

Part2:How to upgrade Lonsdor K518ise adapter kernel

After the APK of K518ise device is upgraded to V1.6.0 version, the KPROG adapter requires to be installed new kernel beforehand. Please refer to below operations.


Step 1: Connect the device to the specified adaptor and plug in 12V power, as shown below.

How to upgrade Lonsdor K518ise adapter kernel



Step 2 : Start up the device, and input password to enter home screen. Click “Update firmware” button in below red box.

How to upgrade Lonsdor K518ise adapter kernel



Step 3: The following interface appears, click “Install Adaptor” in below red box.

How to upgrade Lonsdor K518ise adapter kernel



Step 4: It skips to the below interface, click “OK” to continue.

How to upgrade Lonsdor K518ise adapter kernel



Step 5: It skips to below interface. You will see the progress indicator moving rightwards. When downloading is completed, click OK” and exit. The adaptor kernel is installed successfully.

How to upgrade Lonsdor K518ise adapter kernel