topblog Ivoire blogs

29/03/2019

How To Use Xhorse VVDI Mini Key Tool Copy ID46 Chip

Xhorse VVDI Mini Key Tool is released at OBD2eshop,it can do ID46/ID4D/ID48/ID4C/ID72/ID70 key cloning ,here is the toturial of how to copy ID46 key with Xhorse VVDI Mini Key Tool

Here we go:

Video demo:

 

Frist,

Remove cell before starting sensor copy process

In Xhorse App, connect Mini Key Tool with mobile phone

Then select Transponder Clone

Put transponder into coil

mini-key-tool-copy-id46-key-1

 

Detect transponder information, type: ID46

mini-key-tool-copy-id46-key-2

 

Follow steps below to perform ID46 online calculation

mini-key-tool-copy-id46-key-3

 

1.Put original key into coil to recognize

2.Close the antenna to the ignition switch of the car to collect

If not smart key, insert the original car key, turn on and off the ignition switch. Remove the original car key. Repeat that step until you are prompted to collect the data.

If it is a smart key, take out the smart key battery, put the smart key close to the induction area, turn on and off the ignition switch, then remove the key. Repeat that step until you are prompted to collect

mini-key-tool-copy-id46-key-4 mini-key-tool-copy-id46-key-5 mini-key-tool-copy-id46-key-6

 

Insert the original key into coil for verification

mini-key-tool-copy-id46-key-7 mini-key-tool-copy-id46-key-8

 

Query calculation result

Take out original key, put special chip or wireless remote into vvdi mini key tool

Write data

mini-key-tool-copy-id46-key-9 mini-key-tool-copy-id46-key-10

Copy key success.

Install battery to Jaguar smart key and install special chip into key shell.

Test both keys, both can start engine.

 

mini-key-tool-copy-id46-key-11 mini-key-tool-copy-id46-key-12

 

Source:http://blog.obd2eshop.com/how-to-use-xhorse-vvdi-mini-key...

03:18 Publié dans Blog | Tags : xhorse | Lien permanent | Commentaires (0)

Les commentaires sont fermés.