topblog Ivoire blogs

13/03/2018

How to program SUBARU Forester Smart key all keys with K518 / X300?

SUBARU Forester Smart key all keys lost adapting with Lonsdor K518ISEOBDSTAR X300 DP, I80 key programmer.

 

Preface:

We all knows SUBARU spare parts is very expensive, all key lost will cost a lot, here we share the SUBARU Forester key

adapting method for all key lost.

 

Abstract:

SUBARU Smart key all key lost key adaption have two common methods:

  1. Disassemble the SMT Main ECU, Use AD900 programmer to write data into Toyota smart key, it can directly start the car, No need adapting on the car again, but must use AD smart key.
  2. Disassemble the SMT Main ECU, immobilizer(ESL/ELV), Write initialization data, then study the key on the car.

Here we share the second method, SUBARU Forester use 5290 smart key, Year 2013, No immobilizer, disassemble the SMT Main ECU and ELV Write initialization data and study the key.

 

Process:

  1. Get the ELV(below steer column), disassemble the ELV module, find the 8 PIN EEPROMon the circuit board, Model No. : 93c46.

Desoldering the 93c46, use programmer and adapter read the data, make a backup first then change the code shown as below picture.

-keep the Red marked code code the same, others all change to F, When dump revised, use programmer and adapter write back to 93c46 eeprom, and solder back to the circuit board.

  1. Disassemble the SMT Smart ECU(back side of the A column of the car), it’s appearance is the same as Toyota except the LOGO, disassemble the shell find the 8 PIN eeprom near the CPU, EEPROM Model No. : 93C86. Disassemble the 93c86, Write initialization data, assemble back to the car, if without error the dashboard could be light up.
  2. Use Key programmer add new keys directly. Use Lonsdor K518ISE, OBDSTAR X300 DP, or I80 key programmer, connect the car OBD interface, select SUBARU, then XV smart system, direct add new key, all down, after the keys added, no need sync, directly start the car.

 

Attach Lonsdor K518ISE package

lonsdor-k518ise-key-programmer(1)

Source: http://www.obd2eshop.com/wholesale/lonsdor-k518ise-car-ke...

 

 

and OBDSTAR X300 DP package

obdstar-x300-dp-android-tablet-full-package-xxp(1)

Source: http://www.obd2eshop.com/wholesale/x300-dp-full-package.h...

 

How to conduct 2004-2007 Chrysler Key Learning on Auro OtoSys IM100

This manual introduces how to conduct 2004-2007 Chrysler Key Learning on AuroOtoSys IM100.

PDF attachment:http://www.obdexpress.co.uk/upload/pro/auro-otosys-im100-...

Two options are available when accessing the IMMO function:

Model Selection – the user can select the model and year of the vehicle to locate

the IMMO type.

Type Selection – the user can let the IM100 tablet automatically identify the

IMMO type.

 Procedures before getting started:

1. Connect the IM100 tablet to the vehicle’s DLC via the included main cable for

both communication and power source.

2. Make sure the user has access to WiFi service.

NOTE

Illustrations used in this manual are samples, and the actual testing screens may vary by

vehicle. Observe the menu titles and on-screen instructions to make correct selections

and operations.

Key Learning via Model Selection

1. Insert an original key into the ignition switch and then turn on the ignition.

2. Turn on the IM100 tablet and then tap OtoSys > IMMO. A vehicle menu displays

and a disclaimer prompts up. Tap Accept to continue.

auro-otosys-im100-2004-2007-chrysler-key-learning-1 auro-otosys-im100-2004-2007-chrysler-key-learning-meun-2

3. Tap Chrysler on the vehicle menu.

auro-otosys-im100-vehicle-mene-3

4. Tap Model Selection on the mode menu, and then select the model and year of the

vehicle.

NOTE

You can click the pen icon near the top-right corner to record the operation data. If you

encounter any difficulties, click the icon again to send us the data and the problem, so

that our engineers could help. The network should be connected when uploading the

data.

auro-otosys-im100-chrysler-model-selection-4 auro-otosys-im100-vehicle-menu-5 auro-otosys-im100-2004-2007-chrysler-6(1)

5. Tap Immobilizer Password Reading on the function menu to read the immobilizer

password. Then tap OK and exit to the function menu.

NOTE

The immobilizer password is needed when performing the Key Learning function, so

please memorize or take notes of the password.

auro-otosys-im100-2004-2007-chrysler-7 auro-otosys-im100-2004-2007-chrysler-key-learning-8

6. Tap Immobilizer Learning > Key Learning. Then a Key Learning menu displays.

NOTE

* Old Key Learning: If the BCM module is replaced or the original key(s) can’t work,

the user can perform this function to adapt the original key(s) to the IMMO system

of the vehicle.

* New Key Learning: The user can perform this function to adapt new key(s) to the

IMMO system of the vehicle.

auro-otosys-im100-2004-2007-chrysler-key-learning-9 auro-otosys-im100-2004-2007-chrysler-key-learning-10 auro-otosys-im100-2004-2007-chrysler-key-learning-11

7. Take New Key Learning as an example. Insert the key to be learned into the

ignition switch, turn the ignition on and tap New Key Learning on the menu.

auro-otosys-im100-2004-2007-chrysler-key-learning-12

8. Input the 4-digit immobilizer password and tap OK to continue.

auro-otosys-im100-2004-2007-chrysler-key-learning-13

9. Verify the password and tap OK to continue.

auro-otosys-im100-2004-2007-chrysler-key-learning-14

10. Read the information of keys and tap Yes to continue the learning procedure.

When New Key Learning is completed, tap OK to exit.

auro-otosys-im100-2004-2007-chrysler-key-learning-15 auro-otosys-im100-2004-2007-chrysler-key-learning-16

Key Learning via Type Selection

1. Insert an original key into the ignition switch and then turn on the ignition.

2. Turn on the IM100 tablet and then tap OtoSys > IMMO. A vehicle menu displays

and a disclaimer prompts up. Tap Accept to continue.

auro-otosys-im100-2004-2007-chrysler-key-learning-17 auro-otosys-im100-2004-2007-chrysler-key-learning-18

3. Tap Chrysler on the vehicle menu.

auro-otosys-im100-2004-2007-chrysler-key-learning-19

4. Tap Type Selection on the mode menu.

NOTE

You can click the pen icon near the top-right corner to record the operation data. If you

encounter any difficulties, click the icon again to send us the data and the problem, so

that our engineers could help. The network should be connected when uploading the

data.

auro-otosys-im100-2004-2007-chrysler-key-learning-20

5. Tap Immobilizer Password Reading on the function menu to read the immobilizer

password. Then tap OK and exit to the function menu.

NOTE

The immobilizer password is needed when performing the Key Learning function, so

please memorize or take notes of the password.

auro-otosys-im100-2004-2007-chrysler-key-learning-21 auro-otosys-im100-2004-2007-chrysler-key-learning-22

6. Tap Immobilizer Learning > Automatic Scanning to identify the IMMO type.

auro-otosys-im100-2004-2007-chrysler-key-learning-23 auro-otosys-im100-2004-2007-chrysler-key-learning-24

7. Tap Key Learning on the function menu. Then a Key Learning menu displays.

NOTE

* Old Key Learning: If the BCM module is replaced or the original key(s) can’t work,

the user can perform this function to adapt the original key(s) to the IMMO system

of the vehicle.

* New Key Learning: The user can perform this function to adapt new key(s) to the

IMMO system of the vehicle

auro-otosys-im100-2004-2007-chrysler-key-learning-25(1) auro-otosys-im100-2004-2007-chrysler-key-learning-26

8. Take New Key Learning as an example. Insert the key to be learned into the ignition

switch, turn the ignition on and tap New Key Learning on the menu.

auro-otosys-im100-2004-2007-chrysler-key-learning-27

9. Input the 4-digit immobilizer password and tap OK to continue. auro-otosys-im100-2004-2007-chrysler-key-learning-28

10. Verify the password and tap OK to continue.

auro-otosys-im100-2004-2007-chrysler-key-learning-29

11. Read the information of keys and tap Yes to continue the learning procedure.

When New Key Learning is completed, tap OK to exit.

auro-otosys-im100-2004-2007-chrysler-key-learning-30 auro-otosys-im100-2004-2007-chrysler-key-learning-31

 

 

Add:

1.

2.

3.

4.

5.

6.

7.

8.

Vihicle support list :

 
 
 

04:46 Publié dans Blog, Web | Tags : auro otosys im100 | Lien permanent | Commentaires (0)

09/03/2018

OBDSTAR H110 Do Odometer Reset For 2006 VW PoloVDO K-line,Successful

Here is the step-by-step guide of how to use OBDSTAR H110 VAG to change mileage on 2006 VW Polo

Here we go:

Device: OBDSTAR H110 Immo and Odometer programmer

It is a new device designed for VAG dashboard odometer correction (incl. MQB and NEC+24C64 2014-) and key programming (incl. VAG-I+C Immobilizer).

Car: 2006 VW Polo

Video shows :

https://youtu.be/kBc4jRwblGg

Upload photos…

Dashboard status

obdstar-h110-polo-odometer-correction-1(1)

Connected to Obdstar H110 odometer correction tool and power on

obdstar-h110-polo-odometer-correction-2

Select a car for odometer correction

VEHICLE

obdstar-h110-polo-odometer-correction-3

CLUSTER CALIBRATE

obdstar-h110-polo-odometer-correction-5

VW

obdstar-h110-polo-odometer-correction-6

VW V31.59

obdstar-h110-polo-odometer-correction-7

Loading Obdstar H110 VW software…

obdstar-h110-polo-odometer-correction-8(1)

Initializing…

Authorizing…

Select from vehicle

obdstar-h110-polo-odometer-correction-9

Polo

VDO K line

obdstar-h110-polo-odometer-correction-10(1)

Communicating…

obdstar-h110-polo-odometer-correction-11

Reading mileage…usually 2-5 minutes

obdstar-h110-polo-odometer-correction-13

Check and confirm Current mileage: 4192km

obdstar-h110-polo-odometer-correction-14(1)

Polo dashboard displays the mileage: 4193

Input the new mileage: 20000

obdstar-h110-polo-odometer-correction-15(1)

Adjusting mileage…usually 2-5 minutes

obdstar-h110-polo-odometer-correction-16(1)

obdstar-h110-polo-odometer-correction-17

Finish odometer correction

obdstar-h110-polo-odometer-correction-18(1)

Exiting…

obdstar-h110-polo-odometer-correction-19(1)

Polo dashboard displays the new mileage: 20001

Complete!

http://www.obdexpress.co.uk/wholesale/obdstar-h110-vag-im...

 

http://www.mileageprogrammer.com/obdstar-h110-do-odometer...