topblog Ivoire blogs

13/03/2018

How to conduct 2004-2007 Chrysler Key Learning on Auro OtoSys IM100

This manual introduces how to conduct 2004-2007 Chrysler Key Learning on AuroOtoSys IM100.

PDF attachment:http://www.obdexpress.co.uk/upload/pro/auro-otosys-im100-...

Two options are available when accessing the IMMO function:

Model Selection – the user can select the model and year of the vehicle to locate

the IMMO type.

Type Selection – the user can let the IM100 tablet automatically identify the

IMMO type.

 Procedures before getting started:

1. Connect the IM100 tablet to the vehicle’s DLC via the included main cable for

both communication and power source.

2. Make sure the user has access to WiFi service.

NOTE

Illustrations used in this manual are samples, and the actual testing screens may vary by

vehicle. Observe the menu titles and on-screen instructions to make correct selections

and operations.

Key Learning via Model Selection

1. Insert an original key into the ignition switch and then turn on the ignition.

2. Turn on the IM100 tablet and then tap OtoSys > IMMO. A vehicle menu displays

and a disclaimer prompts up. Tap Accept to continue.

auro-otosys-im100-2004-2007-chrysler-key-learning-1 auro-otosys-im100-2004-2007-chrysler-key-learning-meun-2

3. Tap Chrysler on the vehicle menu.

auro-otosys-im100-vehicle-mene-3

4. Tap Model Selection on the mode menu, and then select the model and year of the

vehicle.

NOTE

You can click the pen icon near the top-right corner to record the operation data. If you

encounter any difficulties, click the icon again to send us the data and the problem, so

that our engineers could help. The network should be connected when uploading the

data.

auro-otosys-im100-chrysler-model-selection-4 auro-otosys-im100-vehicle-menu-5 auro-otosys-im100-2004-2007-chrysler-6(1)

5. Tap Immobilizer Password Reading on the function menu to read the immobilizer

password. Then tap OK and exit to the function menu.

NOTE

The immobilizer password is needed when performing the Key Learning function, so

please memorize or take notes of the password.

auro-otosys-im100-2004-2007-chrysler-7 auro-otosys-im100-2004-2007-chrysler-key-learning-8

6. Tap Immobilizer Learning > Key Learning. Then a Key Learning menu displays.

NOTE

* Old Key Learning: If the BCM module is replaced or the original key(s) can’t work,

the user can perform this function to adapt the original key(s) to the IMMO system

of the vehicle.

* New Key Learning: The user can perform this function to adapt new key(s) to the

IMMO system of the vehicle.

auro-otosys-im100-2004-2007-chrysler-key-learning-9 auro-otosys-im100-2004-2007-chrysler-key-learning-10 auro-otosys-im100-2004-2007-chrysler-key-learning-11

7. Take New Key Learning as an example. Insert the key to be learned into the

ignition switch, turn the ignition on and tap New Key Learning on the menu.

auro-otosys-im100-2004-2007-chrysler-key-learning-12

8. Input the 4-digit immobilizer password and tap OK to continue.

auro-otosys-im100-2004-2007-chrysler-key-learning-13

9. Verify the password and tap OK to continue.

auro-otosys-im100-2004-2007-chrysler-key-learning-14

10. Read the information of keys and tap Yes to continue the learning procedure.

When New Key Learning is completed, tap OK to exit.

auro-otosys-im100-2004-2007-chrysler-key-learning-15 auro-otosys-im100-2004-2007-chrysler-key-learning-16

Key Learning via Type Selection

1. Insert an original key into the ignition switch and then turn on the ignition.

2. Turn on the IM100 tablet and then tap OtoSys > IMMO. A vehicle menu displays

and a disclaimer prompts up. Tap Accept to continue.

auro-otosys-im100-2004-2007-chrysler-key-learning-17 auro-otosys-im100-2004-2007-chrysler-key-learning-18

3. Tap Chrysler on the vehicle menu.

auro-otosys-im100-2004-2007-chrysler-key-learning-19

4. Tap Type Selection on the mode menu.

NOTE

You can click the pen icon near the top-right corner to record the operation data. If you

encounter any difficulties, click the icon again to send us the data and the problem, so

that our engineers could help. The network should be connected when uploading the

data.

auro-otosys-im100-2004-2007-chrysler-key-learning-20

5. Tap Immobilizer Password Reading on the function menu to read the immobilizer

password. Then tap OK and exit to the function menu.

NOTE

The immobilizer password is needed when performing the Key Learning function, so

please memorize or take notes of the password.

auro-otosys-im100-2004-2007-chrysler-key-learning-21 auro-otosys-im100-2004-2007-chrysler-key-learning-22

6. Tap Immobilizer Learning > Automatic Scanning to identify the IMMO type.

auro-otosys-im100-2004-2007-chrysler-key-learning-23 auro-otosys-im100-2004-2007-chrysler-key-learning-24

7. Tap Key Learning on the function menu. Then a Key Learning menu displays.

NOTE

* Old Key Learning: If the BCM module is replaced or the original key(s) can’t work,

the user can perform this function to adapt the original key(s) to the IMMO system

of the vehicle.

* New Key Learning: The user can perform this function to adapt new key(s) to the

IMMO system of the vehicle

auro-otosys-im100-2004-2007-chrysler-key-learning-25(1) auro-otosys-im100-2004-2007-chrysler-key-learning-26

8. Take New Key Learning as an example. Insert the key to be learned into the ignition

switch, turn the ignition on and tap New Key Learning on the menu.

auro-otosys-im100-2004-2007-chrysler-key-learning-27

9. Input the 4-digit immobilizer password and tap OK to continue. auro-otosys-im100-2004-2007-chrysler-key-learning-28

10. Verify the password and tap OK to continue.

auro-otosys-im100-2004-2007-chrysler-key-learning-29

11. Read the information of keys and tap Yes to continue the learning procedure.

When New Key Learning is completed, tap OK to exit.

auro-otosys-im100-2004-2007-chrysler-key-learning-30 auro-otosys-im100-2004-2007-chrysler-key-learning-31

 

 

Add:

1.

2.

3.

4.

5.

6.

7.

8.

Vihicle support list :

 
 
 

04:46 Publié dans Blog, Web | Tags : auro otosys im100 | Lien permanent | Commentaires (0)

05/03/2018

BMW Benz Porsche immo data & KM adjustment with CG Pro 9S12 user manual

CG Pro 9S12 is the upgraded version of CGI100, that means it can import immo data and generate key on BMW Porsche. Meanwhile CG Pro 9S12 can only read IMMO data on Mercedes Benz  instead of a Mercedes Benz key programmer.

Let's together learn about CG Pro 9S12 coverage, driver download, setup and how to use.

 

Part 1: CG Pro coverage:

Workable ECU IMMO List:
BMW:
CAS4+     5M48H/1N35H    (9S12XEP100)
CAS4    1L15Y    (9S12XDP512)
CAS3    0L15Y/0M23S    (9S12XDP512 including CAS3+ series)
CAS3    0L01Y    (9S12DG256)
CAS2    0L01Y/2K79X    (9S12DG256)
CAS2/E66    0L01Y/2K79X    (9S12DG256)
CAS1    0K50E    (912DT128A Write FLASH data online)
EWS4    0L86D/1L86D/2L86D    (9S12DJ64)
EWS3    0D46J/2D47J    (MC68HC711EA9)
EWS2    1D47J    (MC68HC711EA9)
( Support read/write data above for mileage correction and immobilizer reset )

BENZ:
EIS   211  ST12 3L40K/1L59W/4L40K/1L85D/0L85D/2L85D/
EIS   211  HC12  0K50E/3K91D
EIS   209  ST12   3L40K/1L59W/4L40K/1L85D/0L85D/2L85D/
EIS  209  HC12  0K50E/3K91D
EIS   215  ST12   3L40K/1L59W/4L40K/1L85D/0L85D/2L85D/
EIS   215  HC08  2J74Y/4J74Y/1J35D(Can directly reset EIS data with 08 adapter;and read write EEPROM without extra adapter)
EIS    220     HC05
0D53J/0D59J/0D62J/0D69J/0F62J/0F82B/0G47G/
0H51A/1D59J/1D69J/1H52A/2D20J/2D59J
EIS   210     HC05
0D53J/0D59J/0D62J/0D69J/0F62J/0F82B/0G47G/
0H51A/1D59J/1D69J/1H52A/2D20J/2D59J
EIS      203  HC08  1J35D/2J74Y/4J74Y
EIS       164  ST12   3L40K/4L40K/1L59W/0L85D/1L85D/2L85D
EIS       169  ST12   3L40K/4L40K/1L59W/0L85D/1L85D/2L85D
EIS       639  ST12   0L01Y
EIS      639  HC08  0L02M/1L02M/4J74Y/1J35D/2J74Y
EIS       199  ST12   3L40K/4L40K/1L59W/0L85D/1L85D/2L85D
EIS       230  ST12   3L40K/4L40K/1L59W/0L85D/1L85D/2L85D
(Support all above data read/write for mileage correction and immobilizer reset)

Roewe:
Roewe 750 IMMO   0M89C  (Read/Write)

Land Rover:
EWS  ST12   3L40K/4L40K/5L40K
RFA   9S12XEQ384      (1M12S 2M12S 1M53J 2M53J ) 9S12XET512  ( 3M53J  2M53J 1M53J)
 
Dash Types:

Benz
BMW
Domestic cars 9S12 dash
Land Rover
Mini

Audi:
Audi        A4/A5/Q5-BCM      NEC               D70F3634/D70F3380
Audi        ELV      HC08GR        4L35K

Key Program on:
BMW             CAS3             YES
BMW            CAS3+           YES
BMW        CAS4            YES
BMW         CAS4+           YES
BMW            EWS4
BMW          EWS3
BMW          EWS2
Porsche 911               BCM              YES
Porsche Boxster        BCM              YES
Porsche Cayman       BCM              YES
Porsche Panamera        BCM          YES
Porsche Cayenne          BCM          YES
Porsche Macan             BCM           YES
(Program key via eeprom data)

 Workable Chip List:
Microcontroller:
Motorola:
9S12 series:
9S12XDP512-0L15Y
9S12XDP512-1L15Y
9S12XDP512-0M23S
9S12XEP100-1N35H
9S12XEP100-5M48H
9S12XEx512-2M25J
9S12XEx512-3M25J
9S12D64-2L86D
9S12DJ64-0M89C
9S12DT128-1L59W
9S12DT128-4L40K
9S12DT128-1L85D
9S12DG128-3L40K
9S12DG256-0L01Y(CAS)
9S12DG256-2K79X
9S12XHZ384-1M80F

HC912 serie:
HC912DG128-0K50E
HC912DG128A-0L05H
HC912DG128A-3K91D

HC908 series:
HC908AZ60-4J74Y
HC908AZ60-1J35D
HC908GR16-4L35K

HC711 series:
HC711EA9-2D47J

HC705 series:
HC705-0D69J
HC705-0D53J

NEC:
D70F3634
D70F3380

CPU:
ST:
35080DQ
35160DQ
35080_3/6
35080VP/V6

8-foot chip:
24C01
24C02
24C04
24C08
24C16
24C32
24C64
24C128
24C256
24C01A
24C01B
24C02B
24LC01A
24LC01
24LC02
24LC04
24LC16
24LC32
25010
25020
25040
25080
25160
25320
25640
25128
25256
93C46
93C56
93C66
93C57
93C76
93C86
93A86
93CS56
93CS66
93S56
93LC46
93LC56
93LC66
93LC76
93LC86
95010
95020
95040
95080
95160
95320
95640
95128
95256

AMD:
AM29BL802CB
AM29F200
AM29F400
AM29F800

 

Part 2: CG Pro 9S12 driver on mega:

https://mega.nz/#!QMgUzbwR!YHQjkHDBFYG0m-FAMTnrP4Ni9bF5Em...

Win7 (Confirmed)

Tip: Please Run CG Pro 9S12 as administrator

 

Part 3: CG Pro 9S12 driver setup and how to use:

Right click on the"CG Pro 9S12" on the desktop, choose "Run as administrator".

cg-pro-9s12-reads-immo-data-adjusts-km-01

 

Start to the CG Pro setup.

 

Click on "Install"

cg-pro-9s12-reads-immo-data-adjusts-km-02

 

Complete CG Pro setup

cg-pro-9s12-reads-immo-data-adjusts-km-03

 

Device driver Installation Wizard.

Agree the agreement

cg-pro-9s12-reads-immo-data-adjusts-km-04 cg-pro-9s12-reads-immo-data-adjusts-km-05

 

Complete the Device driver Installation Wizard

cg-pro-9s12-reads-immo-data-adjusts-km-06

Connect the CGPRO 9S12 to the computer.

cg-pro-9s12-reads-immo-data-adjusts-km-07 cg-pro-9s12-reads-immo-data-adjusts-km-08 cg-pro-9s12-reads-immo-data-adjusts-km-09 cg-pro-9s12-reads-immo-data-adjusts-km-10 cg-pro-9s12-reads-immo-data-adjusts-km-11

 

This is the CGPRO 9S12 menu.

cg-pro-9s12-reads-immo-data-adjusts-km-12

 

Installing device driver software.

cg-pro-9s12-reads-immo-data-adjusts-km-13

 

You device is ready to use after the driver setup without problem.

cg-pro-9s12-reads-immo-data-adjusts-km-14

Right click on "My computer - Manage - device manager - USB serial port (COM4)", so that you can confirm if the CGPRO 9S12 establishes a good communication with the computer,

cg-pro-9s12-reads-immo-data-adjusts-km-15

Right click the purple icon "CG Pro" then "Run as administrator".

 

Set the language as "English"

cg-pro-9s12-reads-immo-data-adjusts-km-16

Click on "Upgrade firmware" and you can see the firmware is the latest version.

cg-pro-9s12-reads-immo-data-adjusts-km-17

 

At the left column, you can see CG Pro 9S12 works on BMW and Benz, the functions include Anti-theft and Dashboard, the next is the supported model list.

cg-pro-9s12-reads-immo-data-adjusts-km-18

BMW perform dashboard function on the following models.

cg-pro-9s12-reads-immo-data-adjusts-km-19

Benz Anti-theft function and workable models.

cg-pro-9s12-reads-immo-data-adjusts-km-20 cg-pro-9s12-reads-immo-data-adjusts-km-21

CG Pro can read BMW Benz immo data via chips.

cg-pro-9s12-reads-immo-data-adjusts-km-22 cg-pro-9s12-reads-immo-data-adjusts-km-23 cg-pro-9s12-reads-immo-data-adjusts-km-24 cg-pro-9s12-reads-immo-data-adjusts-km-25

Try to read BMW dashboard V4 (35080VP/v6)

cg-pro-9s12-reads-immo-data-adjusts-km-26 cg-pro-9s12-reads-immo-data-adjusts-km-27

Exit the CG Pro software, run as administrator, choose BMW dashboard V4 (35080VP/v6), click on "Open" to choose "BMW original eprom 23500KM.bin" to open.

cg-pro-9s12-reads-immo-data-adjusts-km-28

Click on "Adjust mileage" and write a new value, click on "OK".

cg-pro-9s12-reads-immo-data-adjusts-km-29

CG Pro 9s12 is built-in with Diagram for immo, CAS4-1L15Y for example.

Click the option "Diagram" to follow.

cg-pro-9s12-reads-immo-data-adjusts-km-30 cg-pro-9s12-reads-immo-data-adjusts-km-31

Click on "Open" to open the corresponding file shown as below.

cg-pro-9s12-reads-immo-data-adjusts-km-32

If you click on the current KM, you will get message "Please enter the kilometers value, then click "OK" to start adjusting new value.

cg-pro-9s12-reads-immo-data-adjusts-km-33

Click the "Key" to have an overview.

cg-pro-9s12-reads-immo-data-adjusts-km-34

load the original file

cg-pro-9s12-reads-immo-data-adjusts-km-35

Done

www.obd2eshop.com

 

 

 

04:44 Publié dans Blog | Tags : cg pro 9s12 | Lien permanent | Commentaires (0)

02/03/2018

VXDIAG VCX NANO or VCM2 (Thread from Mhhauto)

VXDIAG VCX NANO Ford or VCM2 What is better when i will program other ECUs to Ford?

ECU or Gearbox ECU, …

 

Stelaras: vcm2 for sureee

 

Braicarsa: VCM2 is gooood

 

Eddz: Stay well away from Vxdiag. It is china developed tool that they claim works better than anything else, but in real life if you encounter a problem there will be no support because there simply is no information about this magic tool.

Be warned because nobody will help you if you get in trouble while using this crap

 

ivica21: Vxdiag for reprogramming is slower than VCM2.For diagnostic is the same.But for new software is Vxdiag better because (black list)only if you have VCM2 with not blacklisted serial.

 

Kim1980: VCM2 SP177-C1 is talked a lottttt in this forum

saying it’s the best clone unit

 

Atmel: Clone vcm2 also has good quality, i not saying ebay or Alibaba. good quality Ford VCM from china works just like original, there is some good quality benz and BMW units out there, vag com and VCP for vag. Honda HDS interface is very cheap from china and latest software can be found online and works great never failed me…

 

Bersch: I used the link from Kim1980 above and bought the SP177-C1

The inner board seems good… upload photos…

vcm2-sp177-c1-pcb-2(1) vcm2-sp177-c1-pcb-3 vcm2-sp177-c1-pcb-4

 

Reference:

Why SP177-C1 is the best VCM2:

Where to buy VCM2 SP177C or SP177C1:

VCM2 Reviews:

04:16 Publié dans Blog | Tags : vcm2 clone | Lien permanent | Commentaires (0)