topblog Ivoire blogs

18/06/2016

Opel OPCOM OP-COM fw V1.59 V1.45 V1.39 ALL include

Here you can get everything you need about 2012v / 2010v OPCOM for OPEL vehicle diagnosis, including the comparison list of opcom 1.59 VS opcom 1.45 VS opcom 1.39, OP-COM firmware PCB display, firmware & software update, and real customer feedback on OPCOM clone.
1. opcom 1.59 VS opcom 1.45 VS opcom 1.39

  opcom fw 1.59 opcom fw 1.45 opcom fw 1.39
Multiplexer  

opcom fw 1.59.png

 

 opcom fw 1.45.png

 

opcom fw 1.39.png

PCB board Read high-definition picture under this table Read high-definition picture under this table Read high-definition picture under this table
Firmware version V1.59 1.45 1.45
Workable Software VAUX-COM_120309a VAUX-COM_120309a Opcom090714
Price €16.99 €18.50 €22.99
Language English English English, German
OS XP or Win7; make sure install dotnetfx35_SP1 system patch, or Opcom software can't perform well; install on Win7 and open software, please choose Run as administrator XP
Software download http://www.chinaautodiag.com/download/op-com_120309a.zip http://www.chinaautodiag.com/html/opcom-op-com-2009-v-can...
Activation No need activation No need activation No need activation
Installation The video demo is on the CD in the package. https://www.youtube.com/watch?v=V7v6nDwzLb8 https://www.youtube.com/watch?v=w-33WcmgroM
Update Can’t update Can’t update Can’t update


2. PCB board/ look inside
Latest V1.59 Firmware PCB

Latest V1.59 Firmware PCB.png
Latest V1.45 Firmware PCB

Latest V1.45 Firmware PCB.png
True V1.39 Firmware PCB

True V1.39 Firmware PCB.png
3. clone Opcom firmware update
update clone Opcom firmware to 1.59 procedure
1): Download free 2014 op-com software, and install the program.
2010.08 opcom clone software Free download link:
http://pan.baidu.com/s/1kTvDJZT
2): Connect Op com 2014 china clone to the computer, and install the drivers correctly, Note: make sure disconnect the internet.
3): Open the OCflash and update the op-com with firmware 1.59 HEX file
4): Open the vaux-com software version is 2012.08, you can check opcom firmware version is upated to 1.59.

update clone Opcom firmware to 1.60 procedure
1. disable internet connection
2. install driver for op-com 1.45 from op-com 08.2010 driver cd in device manager i see op-com v2.0
3. then install VAUX-COM_120309a+131223d_GB+OcFlash China.exe
4. open OCFLASH FW UPG and load fw160.hex file
5. in oc flash - flashing mode is automatic
6. press flash and wait about 1 minute flashing is finished
7. after ocflash , use Mprog FTDI flash utiliy to change the FTDI 232R eeprom content . it should be seems that "USB Serial to converter" rather than "Opcom usb v2" interface . (you need to find the .ept file for ft232r ic)
8. next, install the FTDI drivers supplied with "VAUX-COM_120309a+131223d_GB+OcFlash China.exe” package.
9. lastly if you 're lucky, opcom interface should be works

(Ftdi chip with program called mprog)

4. OPCOM software free download & update
op-com_120309a.zip
opcom-op-com2010v.zip
op-com-en-139new.zip
opcom-de-090420-driver.zip

Notes:
Be sure to disable/uninstall anti-virus software
Please note,anti-virus software can flag up this product software as having a virus. This is a false positive and is due to the software containing the application file like .exe. So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable virus scanner! Our product software is completely safe and virus free and all other virus scanners confirm this.

5. customers feedback
opcom fw 1.59 customers feedback:
1)Opcom V1.60 is known to be buggy for Vectra-C so better to use v1.59 anyway
2) Op-com V1.59, Vectra C tested and its working like a charm
3) opcom v5 (1.59) hardware is the best cable. China clone V5 the one with real PIC18F458 works with 08/2010 china.
4) 150-200 Euros for an EU clone which is a disgrace (they neither made the original software, nor hardware, nor license hack, they just pick up the profit by selling for ridiculous amount somebody else’s work). I would rather to spend €16.99 Free shipping worth v5 from China. It works.

opcom fw 1.45 customers feedback:
1) I did a quick test on Astra J 2013 year and it worked well. Connection to all modules. In some of them there are only error reading but anyway it is a big progress since the 2010 version and a light at the and of a tunnel for future updates.
2) I try on astra-h working good firmware 1.45
3) Vectra B 2.0 dtl. All work.
4) corsa c z10 work ok
5) opel vivaro 2002 1.9dti work
6) work fine with Astra 2012, 2.0 diesel
7) opel vectra c 2004 all ok.
8) Woks Ok for me in all modules ,the program update firmware but all is ok
I made a diagnose on all controlers of a corsa c 2001 z10 xe. And work fine.
9) Tested on Vectra b and it’s working like a charm.

09:10 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

17/06/2016

(Solved) Kess v2 fw4.036 External exception EEFFACE and Invalid protocol file

Kess v2 fw4.036 Ksuite V2.22 ( Item No. SE87-D at obdexpress.co.uk) gets any of these 3 error messages "Invalid protocol file", "External exception EEFFACE", or "no protocol found" after format the SD card. How to solve them? Following parts will offer tested working solution. Hope it helps.

Part 1: EXTERNAL EXCEPION EEFFACE
For those users who have Kess V2 master Ksuite V2.22 (Item No. SE87-D), a part of users may get a common error “EXTERNAL EXCEPION EEFFACE"?

ksuite external excepion eefface.jpg
(Tested) 100% working Solution:
Download file "Driver_USBDEVICEDRV.zip" I uploaded at mega.nz and then setup, usually the problem will be fixed
https://mega.nz/#!FEBHRRjS!KApCf3gl3RSOoSxPvy7ZcDpcciAFtS...
Note: This file is safe to download.

A little percent of users may have no luck, then download one more fixup software "kess v2 fixusb (se87-d) " and then setup.
https://mega.nz/#!oVRG1YLZ!hABNRfbSXgd-EexPCKX6nWPv1_cNga...
Hope it is helpful

Setup Tips (Important):
If Kess v2 fw4.036 v2.22 is not working, you are strongly advised to install our supplied working Setup 1.93 selfinstall.rar”, if you keep on installing the higher version of software, just copy the program you installed on C:// and save, then install “Setup 1.93 selfinstall.rar” , finally replace the same file in Local disk C: with the newly saved data; then it will work

Part 2: Kess v2 fw4.036 Invalid protocol file
Question: I have kessv2 software 2.08 fw 4.036 and if selected siemens PCR2.1 or siemens simos 10.12 write me message *Invalidprotocol file* tested ecu MED17.5.5 and this working fine

Working solution (Tested):
Option 1: Maybe some steps are not needed but I do like this:
(Note: to test this way is at your risk if you use KESS V2 ksuite V4.036 from obd2express.co.uk)
Do all steps to firmware update -> Done -> Connect kess to PC again -> run “Kess v2 Token Resetter”with protocol corrections -> (Then need push two button) PUSH "KESS protocol Update Loader" and wait ~ 5-10 sec until winrar end working ->PUSH KESS protocol update start(program will start and update your sd card again) -> all done

Option 2: I have solved invalid protocol by formatting sd with some format program (EASEUS partition master) and not windows. Now all ok.

Part 3: get "no protocol found" after format the SD card
Usually, some users may format the SD card at any reason, then get "no protocol found", the fast way they think is to get new program online, actually you are supposed to have one new customized SD card from the factory not directly get software online.

10:30 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

16/06/2016

OBDSTAR F108 PSA PIN Code Reader testable model List download

Here is complete Peugeot Citroen and DS car and model year list for OBDSTAR F108 PSA PIN CODE Reading and Key Programming Tool,you can free download the testable model List from this post.

F108 PSA Pin Code Tool Function:
Key programming + PINCODE read via OBD

OBDSTAR F108 PSA PIN Code Testable model List

PEUGEOT
Select from vehicle

Africa
206(VF32)
BSI2

Asia
China
Immobiliser
206
207
Type 1
Type 2
2008
3008
301
307
Type 1
Type 2
308
308S
4007
407
408
508
807
Remote
Smart key system
508
Replace engine ECU
Other
207CC(VF3W)
407(VF36)
508
Proximity
Partner
-2008
BSI2
2008-
PSA CAN system

Euro
106(VF31)
1007(VF3PM)
2005-2014
1007(VF3K)
2003-2005
2005-2007
2007-
206(VF32)
BSI1(46 chip)
207(VF3W)
208(VF3C)
2008(VF3C)
306(VF37)
Immobiliser
CPH
307(VF33)
BSI1
PSA CAN system
308
2007-2013(VF34)
2013-(VF3L)
Non Proximity
3008(VF30)
PSA CAN system
406(VF37)
CPH1
406(VF38)
BSI2
BSI3
BSI4(46 chip)
406 double seat
CPH1
407(VF36)
4007(VF3V)
Gas
Proximity
Non Proximity
Diesel
508(VF38)
Proximity
Non Proximity
5008(VF30)
607(VF39)
-2005
BSI2
2005-
806(VF3A)
Immobiliser2
CPH
807(VF3E)
BSI1
PSA CAN system
Expert(VF3X)
//Immobiliser1//3&8
Immobiliser2
Immobiliser3
CPH
2007-
Partner(VF3G/VF35)
Immobiliser1
Immobiliser2
BSI1
BSI2
CPH
Partner(VF37)
PSA CAN system
Ranch
//Immobiliser1Immobiliser1//3&8
Immobiliser2
Rcz(VF34)
PSA CAN system
South America
206
207
2008-
208(VF3C)
308
2011-
3008
407(VF36D)
408
508(VF38)
Proximity
Select from type
Immobiliser
Type 1
Type 2
Type 3
Type 4
Type 5
Type 6
Remote
Smart key system
Type 1
Replace engine ECU
Read security code

CITROEN
Select from vehicle
Africa
C2(VF7J)

Asia
Immobiliser
C2
Type 1
Type 2
C3
C3
C3-XR
C4
C5
C6
C8
Elysee[ELYSEE]
New Elysee
Picasso[PICASSO]
Thiomphe[TRIOMPHE]
C-CROSSER
C-Quatre
Remote
Smart key system
C4 L
Replace engine ECU
Euro
Berlingo(VF7M)
Immobiliser1
Immobiliser2
BSI1
BSI2
CPH
Berlingo(VF7G)
BSI1
Immobiliser3
Berlingo3(VF77)
C-Crosser(VF7V)
Gas
Proximity
Non Proximity
Diesel
C1(VF7P)
C2(VF7J)
Type 1
Type 2
C3(VF7F)
-2006
2006-
C3 Aircross
2006-
C3 Picasso(VF7S)
C3 PLURIEL
2002-
C4(VF7L/U)
C4(VF7N)
Proximity
Non Proximity
C5(VF7D)
BSI1
BSI2
BSI3
C5(VF7R)
Type 1
Type 2
Type 3
C6(VF7T)
C8(VF7E)
Type 1
Type 2
Dispatch(VF7B)
CPH
Immobiliser1
Immobiliser2
Immobiliser3
Dispatch(VF7X)
Evasion
CPH
Immobiliser1
Immobiliser2
Jumpy(VF7B)
CPH
Immobiliser1
Immobiliser2
Immobiliser3
Jumpy(VF7X)
Nemo(VF7A)
Type 1
Type 2
Relay
Relay2
Immobiliser
Relay3(VF3Y)
Saxo(VF75)
Immobiliser1
Synergie
CPH
Immobiliser1
Immobiliser2
Xantia(VF7X)
CPH
Immobiliser1
Immobiliser2
Xsara(VF7N)
CPH
BSI1
BSI2
BSI3
Xsara PIC(VF7C)
BSI1
BSI2
South America
C3
2003-2013
2014-
Select from type
Immobiliser
Type 1
Type 2
Type 3
Type 4
Type 5
Remote
Smart key system
Type 1
Replace engine ECU
Read security code
DS
Select from vehicle

Asia
Immobiliser
DS5
Remote
Smart key system
Euro
DS3(VF7S)
DS4(VF7N)
Proximity
Non Proximity
DS5(VF7KF)
CPH
Immobiliser1
Immobiliser2
Select from type
Immobiliser
Type 1
Type 2
Type 3
Type 4
Type 5
Remote
Smart key system
Type 1
Read security code

F108 PSA Pin Code Tool Package List:

obdstar-f108-psa-pin-code-reading-key-programming-tool1.jpg

09:43 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)