topblog Ivoire blogs

21/12/2017

SDconnect C4 DAS Fault (1.2)-2.503.9901: Solved & Worked again

Phingoc in trouble:

The laptop is a Dell D630 with a china SDconnect C4.

Xentry 03/2012

DAS 03/2012

It was all working fine last i used the machine.

So.. I connect the MUX to the car (smart 451), and then the lanwire to the mux and computer. Then i turn on the ignition.

In xentry i choose Smart -> 451 -> Diagnostic -> Das opens

in das: Identify car by control unit. After a few seconds some update thing appears and disappears followed by an error.(see att.) Fault (1.2)-2.503.9901. Cannot connect to car.


DAS-Fault-(1.2)-2.503.9901

Doesnt work with wire or wireless.

Please help me.

 

Rocinante Wrote: 

Delete the 3 “update” folders in C:program filesSDconnect toolkit (or rename them).. then perform a repair of your SDNetControl by pressing StartProgramsServiceSetup SDNetControl .. it will start up and ask what you want to do, select repair.. let it do its thing and then go back and delete/rename the update folders in C:program filesSDconnect toolkit then REBOOT when its done… that should get you up and running.. it is VERY important to REBOOT after deleting the update folders!!!

 

Phingoc feedback:

Thank you verry much! Big Grin that fixed the whole problem.

 

  1. start laptop
  2. Rename update folders
  3. Run setup SdNetControl
  4. The “repair” option wasnt displayed, but it went straight into instalation. No options, but it went automaticaly to instalation :S
  5. Reboot after instalation

Re-delete or Rename update folders after running SDNC setup

  1. Delete setings from the MUX
  2. Reconfigure SDconnect
  3. Start Xentry/das and it worked straight away. Big Grin

10:52 Publié dans Blog | Lien permanent | Commentaires (0)

19/12/2017

How to use MB Star C5 hard disk and how to update Star C5?

MB Star C5 moveable hard disk is used for containing Xentry DAS, please do not use it as a computer system hard disk.

Here two tips to follow.

Option 1. you use C5 disk on your own computer. Tip: advice you not rework it or dismantle it and plug it to the computer to modify the data.

 

Option 2. you buy the extra computer together with MB Star C5, then you are advised to prepare one blank hard disk for system installation because the computer you bought doesn't come with hard disk.

 

mb star c5 hard disk-02

How to update DoIP Xentry Connect C5?

Usually you are required to send back the MB Star C5 hard disk for update unless the engineers can make out the updating software for download.

 

Attach one picture which shows the hard disk location in the C5 mux.

star c5

 

http://blog.obd2eshop.com/how-to-use-mb-star-c5-hard-disk...

How to use MB Star C5 hard disk and how to update Star C5?

MB Star C5 moveable hard disk is used for containing Xentry DAS, please do not use it as a computer system hard disk.

Here two tips to follow.

Option 1. you use C5 disk on your own computer. Tip: advice you not rework it or dismantle it and plug it to the computer to modify the data.

 

Option 2. you buy the extra computer together with MB Star C5, then you are advised to prepare one blank hard disk for system installation because the computer you bought doesn't come with hard disk.

 

mb star c5 hard disk-02

How to update DoIP Xentry Connect C5?

Usually you are required to send back the MB Star C5 hard disk for update unless the engineers can make out the updating software for download.

 

Attach one picture which shows the hard disk location in the C5 mux.

star c5

 

http://blog.obd2eshop.com/how-to-use-mb-star-c5-hard-disk...