topblog Ivoire blogs

16/05/2016

Three ways to Register Autel Maxidas DS708

Autel MaxiDAS DS708 is multi-functions diagnostic scanner tool in auto diagnostic obd center. Maxidas ds708 obd2 scanner can be by three ways to Register Autel Maxidas DS708,the following is a detailed description.

The first way : Use computer to register on www.auteltech.com

Open Autel MaxiDAS DS708 scanner and find out the Product Serial No. and Register Password in System/Help > about function.

Autel MaxiDAS DS708 scanner-1.jpg
Visit www.auteltech.com and register with the serial number and password from DS708 scanner.

Autel MaxiDAS DS708 scanner-2.jpg

The second way: register on the scan tool

The first time you start the scan tool, it will pop up a message box to advise user to register your tool, showing as follow. This message will display 30 seconds each time you power the tool up until properly
registered.

Autel MaxiDAS DS708 scanner-3.jpg
NOTE: No update can be carried out before the tool is registered. If Update is selected, the update screen will show as follow:

Autel MaxiDAS DS708 scanner-4.jpg
1. Click on Register button in the popup MessageBox and activate Register Wizard.

Autel MaxiDAS DS708 scanner-5.jpg
2. Click on Next to start registration. The scan tool will automatically connect to Autel Server. Follow the steps in “A. Register on Internet” to register your tool on Internet.

3. When you finished the registration on Internet, click on Complete in the Register Wizard.

Autel MaxiDAS DS708 scanner-6.jpg
4. Then click on Close in the Register Wizard to shut down the program.

Autel MaxiDAS DS708 scanner-7.jpg
5. Restart the scan tool to finish registration procedure.


The third way: Register on computer
You may register the scan tool by two softwares.

1. DS708 Register Wizard
Insert the SD card into your computer and run the DS708 Register Wizard. Follow the step2 to step4 in “the second way. Register on the scan tool” to complete registration to SD card.
Put the SD card back to the scan tool and restart it to finish registration procedure.

2. DS708 Update
Insert the SD card into your computer and run the DS708 Update. There
is a Register option in the log-in window.

Autel MaxiDAS DS708 scanner-8.jpg
When click on it, it
will automatically link to DS708 Register Wizard. Follow the step2 to step4 in “B. Register on the scan tool” to complete registration to SD card.
Put the SD card back to the scan tool and restart it to finish registration procedure.

http://www.mileageprogrammer.com

 

11:24 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

13/05/2016

VXDIAG Subaru SSM 01.2015 Free Download and Setup Instruction

Recently, a part of users feedback VXDIAG Subaru SSM 10.2015 is not working, the error message is shown as follows:

fail to use-pic1.jpg

vcx plus-pic2.jpg

The solution is to uninstall VXDIAG Subaru SSM 10.2015 and reinstall VXDIAG Subaru SSM 01.2015.

VXDIAG SUBARU SSM III V2015.1 Free Download:
Subaru_01_2015.rar 712.2 MB
https://mega.nz/#!5YcnXBiC!ipnGmoe1i5ZJZxxr04sXn08TxH7cE-...

VXDIAG SUBARU SSM III V2015.1 setup:

OS: Windows XP/Vista/Win7/Win8/Win8.1

Video demo:
https://www.youtube.com/watch?time_continue=2&v=cqGmY...

Setup instruction in text file:
Open "My Computer", open CD-Rom, open "SSMIII Software October 2013 Ver. Full", click "Setup" and then accept the terms to install.
Click "1. Install diagnosis software to computer"

install diagnosis software to computer-02(01).jpg

install diagnosis software to computer-02.jpg

PC application installation was successful.

Get following prompt, click "Ok"

setup-03.jpg

Click "Quit installation"

quit installation-04.jpg

Back to the CD files, open folder "Patch_for_SSM3_10_2013", right click the patch to open it. Then after SSMIII 10_2013 update success, click OK to end process.

patch-05.jpg

patch-06.jpg

Now, browse www.vxdiag.net, download newest vxdiag driver.

vx manager new download-07.jpg
Save this newest Vxdiag driver file to the local disk. Extract it and open it, it displays as"VX Manager".

Install VX Manager Setup Wizard, after go over the third step, connect device to the computer and the Subaru vehicle. Complete install "Found new hardware"

vcx sdk driver install-08.jpg

Open the icon "Vx Manager", click option "Information" and select the icon "License" at the right button corner of "Information" to get it updated.

vx manager-09.jpg

vx manager-10.jpg
Then click the option "License" at the left side to find out the Passthru and Subaru are available.

license has been updated-11.jpg

Then click "Diagnostic APP" and select "Downloading"

diagnostic app-12.jpg

Click "Run"

click run-13.jpg

Come to Main Menu

main menu-14.jpg

Click "Tool" to do some settings. eg. Language.

language-15.jpg

http://www.mileageprogrammer.com/

11:34 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

11/05/2016

How to do Mercedes W221 W204 all key lost with VVDI MB BGA Tool

Two successful case of doing all key lost for Mercedes-Benz W221 and W204!! With Mercedes key programmer VVDI BGA tool.

Case 1- add key lost for W221
- I bought EIS W221 lock with a key from the lock from one machine. I have read the PSW. I will make a complete loss of W221 key in the future?
- you have uesedd/ 2nd-hand EIS with working key,you can do like this for W221 all key lost
1.read all key lost EIS data-> save EIS data
2.read used EIS data enter password,get erase password->renew used EIS.
3.load step1 EIS data to renewed EIS with password->write EIS data
4.load EIS data(with key password)->prepare key file
5.input new key to device IR reader->load key file->write
6.insert new key to EIS->EIS will learn the new key->key learn success

by the way, if your all key lost W221 is motorola EIS,not need to change EIS, remove eis get eeprom by programmer (VVDI PROG).
then load eeprom to VVDI MB TOOL prepare key file.

Case 2- add key lost for W204
-I have a w204 All key lost and i program a new EIS with VVDI, the ignition doesn't come on or crank, but the steering can lock and unlock. can someone guide me what to do?
- about W204 all key lost(change new EIS), refer to following steps,maybe helpful:
1.Read EIS data via obd,then Save EIS data
2.adapt ESL:Read ESL data->Get Erase Password->Renew ESL
3.Change new EIS, Load EIS data(step1)->write Key Password(enter manually and at random)->Write EIS data
4.Personalize W204 ESL
5.Load EIS data(with Key Password)->Prepare Key File
6.Input new Key to device IR reader->Load Key file->write
7.Insert new Key to EIS->EIS will learn the new key->key learn success

11:31 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)