topblog Ivoire blogs


MPPS V18 ECU China Clone PCB Rework

Why you need rework the PCB of MPPS V18 china clone?

Because there are two versions of Mpps china clone. One comes with missing components and different resistors are installed with red marks below:



Working mpps v18 clone should be like this:




So, some cheap MPPS china need rework.

For the mpps above:

D1 = PESD1CAN ESD protection



Zoom on it and see what’s missing.




this schematic if it also helps


In summary, not all china good! and you get what you paid for.

Good luck with china clones.

08:59 Publié dans Blog, Shopping, Web | Tags : mpps v18 | Lien permanent | Commentaires (0)



Latest Version of BMW ICOM NEXT A+B+C Diagnostic scanner new arrive,It support WIFI and Work OK with the Internet and Printer.




ICOM NEXT A+B+C Diadnostic Head improved Functionality and Performance:

1. Gbit workshop LAN, backwards compatible
2. Preparation for Gbit LAN on vehicle OBD(cars do not yet support this and interface not yet defined,ICOM Next hardware adaptation will be necessary for future Gbit car interface,will cause adaptation costs)
3. Faster start-up time and high throughput
4. Through high-performance, low-power ARM SoC
5. Improved handling
6. More flexible OBD cable
7. Lighted button for logs etc

ICOM NEXT A+B+C Diadnostic Head Overview:

Share the same functionality as ICOM A2
ICOM NEXT A+B+C with WIFI is a redesign of ICOM A2+B+C
Backwards compatible to car adapters (ICOM B, C) and motorcycle adapters (ICOM D, E)

ICOM NEXT ABC Specifications:

Zeroization of data on tamper detection
Secure supply chain assurance
Key storage using physically un-clonable function
CRI Pass-Through DPA Patent Portfolio
Advanced cryptographic Services

BMW Software Compagible wirth ICOM Next A:

ISPI NEXT—BMW ISPI NEXT is latest generation after service tool for BMW, these brief instructions describe the basic functions of the AIR application (Aftersales Information Research) in Service. For the Diagnostic, it use IPSI (Rheingold) and ISPI Next for Coding Programming functions.

ISTA/D— Integrated Service Technical Application Diagnostic. ISTA/D is used to diagnose BMW all series and models from all systems.

ISTA/P— Integrated Service Technical Application/Programming. ISTA/P is used to process all coded, programmed and enable-dependent control modules in BMW Group vehicles.

Rheingold—Diagnostic and repair guide, including Diagrams and disassembly Figure

KSD—BMW KSD (Kaufmännische Service Daten, i.e. Commercial Service Data) is a collection of invaluable data for determining labor hours, inspection sheets and general service methods. There’s also information about wheels and rims for the various models.

EasyConnect— Used to Configure the Environment Parameter of Engineer Software for E series, can activate or release ICOM Port

IToolRadar— Used to recognize ICOM, activate or release ICOM Port

ETK— Accessories Catalog

EDIABAS Tool32— Engineer Software for E series, able to run directly

INPA— Engineer Software for E series, for diagnosis

NCS Expert Tool—- Engineer Software for E series, for coding

WinKFP—Engineer Software for E series, for programming

E-sys — Engineer Software for F series (available for programming and coding)

BMW Standard tool

Coding Database

Coding Tool

BMW ICOM A2  WiFi Package List:
1pc x BMW ICOM B Most
1pc x BMW 20pin Cable
1pc x USB Cable
1pc x LAN Cable
1pc x OBD Cable
1pc x Optical fiber

11:37 Publié dans Blog | Tags : bmw icom | Lien permanent | Commentaires (0)


How to setup SD connect C4 for Mercedes BUS diagnosis

I want to diagnose a Mercedes-Benz BUS using Xentry 2015.12 but the program displays “License is incorrect”. Luckily, got help from DieTrih. Copy the solution and result for sharing. Hopefully, it helps others also.

Software ver.: Xentry 12/2015

Tool: SD connect C4


HWID: 6CCA1532A511

AppID: 253

LAN-ID: 08005BABA84E


my cars are working fine.

cars and trucks working ok, so i bet it’s working Xenry; but cannot do buses or other heavy equipment MB. I only have this problem with Buses –> “licence incorrect”.


in Xentry this Licence Error Message (sorry, screenshot is in German; i have translated it into English).


Fahrzeug: CC400.121



Lizenz ist fehlerhaft

(Vehicle type: CC400.121



License is incorrect)



The solution for me….


DAS License.0 Fix download on Mega


with DAS.Standalone for Xentry.OpenShell.XDOS and DAS.Xentry (2015.12)

DAS v7.7.0.1

Use it with old keys for DAS.

MB Bus and Bharatbenz are working.

Included: das32r2.exe (Usual file), das32r2_sl.exe (Standalone), lic.sli (Original file if needed).

Don`t look on the file size, just packed executable.


mustang’s review: (BIG THANLS)

I confirm that DieTrih solution works perfect.

I used windows xp and windows 7.

all in 32 bits.

xentry das versions from 2015.5 until 2016.12

everything is working fine… also in bus




Note: this is a user solution @DieTrih. Please try on your own risk; no one holds any responsibility


11:26 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)