topblog Ivoire blogs

22/06/2016

OBDSTAR X300 PRO3 VS.SKP-900 VS.OBDSTAR X-100 PRO

OBDSTAR X300 PRO3 is a new released powerful key programmer master with a good reputation.

SuperOBD SKP-900 is a OBD2 key programmer supports a large range of cars models all over the world.

OBDSTAR X-100 PRO is a key programmer also supports Eeprom Adapter+IMMO+Odometer+OBDII Function.

What are the differences among OBDSTAR X300 PRO3, X100 pro and SuperOBD SKP900 key programmer?

Here let’s check comparison table of the main differences and similarities among the 3 key programmers from as below.

Item OBDSTAR X300 Pro3 (sk196) SuperOBD SKP900 (sk155) OBDSTAR X100 Pro (sk164)
Photo  

obdstar-x300-pro3.jpg

 

superobd-skp-900.jpg

 

x-100-pro.jpg

Price €526 €545 €308
Update Online 1 year Free update Lifetime Free update 1 year Free update
Built-in card SD card NO 4G TF card
Language English English, Portuguese English, simplified Chinese, traditional Chinese
Testing Note can’t support VW 4th & 5 th IMMO supports TOYOTA G chip and H chip can’t support Proton
Functions Immobiliser;Odometer adjustment; OBDII;EPB;EEPROM/PIC; Oil/Service reset;Battery matching Key programming Immobilizer;Odometer Correction;OBD;EEPROM
Vehicles All support almost Asian, European, American vehicles. For detailed models list, OBDSTAR X300 PRO3 Vehicle List after Test SuperOBD SKP-900 car list
Conclusion OBDSTAR Key Master performs best among the three auto key programmer: 1- more functions: OBDSTAR X300 Pro3 covers more functions than SKP900 and X100 Pro does. 2- runs better: X-300 Pro3 with ARM high speed chip keeps it running fast, stable and anti-jamming While SKP900 supports newer protocol then X300 Pro does.


Customer Feedback for X300 PRO:
Customer 1:
For the price and its function over Skp900 looks to be the better buy.
mileage is extra bonus, more money & something different. (New story's)
obd2 scanning is limited but extra bonus on rewriting vin # on donor Ecu.

Customer 2:
I have bought 2 of there newest programmer (KeyMaster X300Pro) claim to have the same program as the SKP900. Not true it lacks the newest protcal, all thou the F100 does have the newest protcal.

SKP900 car tested by our customers and feedback:
Here is for USA cars

2013 CHRYSLER 200 - WORKS FINE
2008 DODGE CHARGER - WORKS FINE
2013 FORD EDGE - WORKS FINE
2011-2013 FORD F-150 - WORKS FINE
2013 MUSTANG - WORKS FINE

2012 JEEP COMPASS - WORKS FINE
2008 JEEP WRANGLER - WORKS FINE
2014 KIA RIO - WORKS FINE
2013 KIA SOUL - WORKS FINE
2013 KIA FORTE - WORKS FINE

2009 TOYOTA CAMRY - WORKS FINE, REMOTE + TRANSPONDER SEPERATE PROCEDURE BOTH WORKS
2012-2013 TOYOTA CAMRY - WORKS FINE, REMOTE + TRANSPONDER SEPERATE PROCEDURE BOTH WORKS
2013 TOYOTA HIGHLANDER - WORKS FINE, REMOTE + TRANSPONDER SEPERATE PROCEDURE BOTH WORKS

2002 VOLKSWAGEN GTI - WORKS FINE

2005 - NISSAN 350Z - WAS ABLE TO PULL BCM BUT COULD NOT PROGRAM KEY. I THINK JUST NEED TO PLAY WITH IT LONGER
2013 FORD FOCUS - DOES NOT WORK
2014 FORD FIESTA - DOES NOT WORK
Can do all keys lost with every car mentioned.

Latest Customer Feedback:
For mileage correction Customer Feedback:
Hyundai Accent 2011... by obd in 2 seconds
Mileage
focus 2013 OK
fiesta 2012 OK
grand punto 2010 OK
punto 2007 OK
grand cherokee 2013 OK
astraj 2010 2011 2012 NOT OK
Fiat fiorino obd ok
Audi A4 2007... in 20 seconds by OBD.
2013 jetta mono display ok.
Chevrolet CRUZE 2012, Read security code ok and Mileage ok
Cruze 13 miles ok
Volkswagen Amarok 2014 ok ( chose golf NEC 24C64 white meter 2013-)
Porsche Cayenne 2012 mileage OK
Skoda Octavia 2010 nec+24c32 VDO mileage OK
Skoda Superb 2012 via obd mileage ok
Polo 2004 VDO k Line mileage OK
have made KM visteon dash 95320 vw golf 5 with success, just plug and play

For key programming:
Honda civic 2006 all keys lost OK
Chevrolet Captiva 2012, 2013 ok

OBDSTAR X-100 Pro tested yes for the following models for mileage change

10:40 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

18/06/2016

Opel OPCOM OP-COM fw V1.59 V1.45 V1.39 ALL include

Here you can get everything you need about 2012v / 2010v OPCOM for OPEL vehicle diagnosis, including the comparison list of opcom 1.59 VS opcom 1.45 VS opcom 1.39, OP-COM firmware PCB display, firmware & software update, and real customer feedback on OPCOM clone.
1. opcom 1.59 VS opcom 1.45 VS opcom 1.39

  opcom fw 1.59 opcom fw 1.45 opcom fw 1.39
Multiplexer  

opcom fw 1.59.png

 

 opcom fw 1.45.png

 

opcom fw 1.39.png

PCB board Read high-definition picture under this table Read high-definition picture under this table Read high-definition picture under this table
Firmware version V1.59 1.45 1.45
Workable Software VAUX-COM_120309a VAUX-COM_120309a Opcom090714
Price €16.99 €18.50 €22.99
Language English English English, German
OS XP or Win7; make sure install dotnetfx35_SP1 system patch, or Opcom software can't perform well; install on Win7 and open software, please choose Run as administrator XP
Software download http://www.chinaautodiag.com/download/op-com_120309a.zip http://www.chinaautodiag.com/html/opcom-op-com-2009-v-can...
Activation No need activation No need activation No need activation
Installation The video demo is on the CD in the package. https://www.youtube.com/watch?v=V7v6nDwzLb8 https://www.youtube.com/watch?v=w-33WcmgroM
Update Can’t update Can’t update Can’t update


2. PCB board/ look inside
Latest V1.59 Firmware PCB

Latest V1.59 Firmware PCB.png
Latest V1.45 Firmware PCB

Latest V1.45 Firmware PCB.png
True V1.39 Firmware PCB

True V1.39 Firmware PCB.png
3. clone Opcom firmware update
update clone Opcom firmware to 1.59 procedure
1): Download free 2014 op-com software, and install the program.
2010.08 opcom clone software Free download link:
http://pan.baidu.com/s/1kTvDJZT
2): Connect Op com 2014 china clone to the computer, and install the drivers correctly, Note: make sure disconnect the internet.
3): Open the OCflash and update the op-com with firmware 1.59 HEX file
4): Open the vaux-com software version is 2012.08, you can check opcom firmware version is upated to 1.59.

update clone Opcom firmware to 1.60 procedure
1. disable internet connection
2. install driver for op-com 1.45 from op-com 08.2010 driver cd in device manager i see op-com v2.0
3. then install VAUX-COM_120309a+131223d_GB+OcFlash China.exe
4. open OCFLASH FW UPG and load fw160.hex file
5. in oc flash - flashing mode is automatic
6. press flash and wait about 1 minute flashing is finished
7. after ocflash , use Mprog FTDI flash utiliy to change the FTDI 232R eeprom content . it should be seems that "USB Serial to converter" rather than "Opcom usb v2" interface . (you need to find the .ept file for ft232r ic)
8. next, install the FTDI drivers supplied with "VAUX-COM_120309a+131223d_GB+OcFlash China.exe” package.
9. lastly if you 're lucky, opcom interface should be works

(Ftdi chip with program called mprog)

4. OPCOM software free download & update
op-com_120309a.zip
opcom-op-com2010v.zip
op-com-en-139new.zip
opcom-de-090420-driver.zip

Notes:
Be sure to disable/uninstall anti-virus software
Please note,anti-virus software can flag up this product software as having a virus. This is a false positive and is due to the software containing the application file like .exe. So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable virus scanner! Our product software is completely safe and virus free and all other virus scanners confirm this.

5. customers feedback
opcom fw 1.59 customers feedback:
1)Opcom V1.60 is known to be buggy for Vectra-C so better to use v1.59 anyway
2) Op-com V1.59, Vectra C tested and its working like a charm
3) opcom v5 (1.59) hardware is the best cable. China clone V5 the one with real PIC18F458 works with 08/2010 china.
4) 150-200 Euros for an EU clone which is a disgrace (they neither made the original software, nor hardware, nor license hack, they just pick up the profit by selling for ridiculous amount somebody else’s work). I would rather to spend €16.99 Free shipping worth v5 from China. It works.

opcom fw 1.45 customers feedback:
1) I did a quick test on Astra J 2013 year and it worked well. Connection to all modules. In some of them there are only error reading but anyway it is a big progress since the 2010 version and a light at the and of a tunnel for future updates.
2) I try on astra-h working good firmware 1.45
3) Vectra B 2.0 dtl. All work.
4) corsa c z10 work ok
5) opel vivaro 2002 1.9dti work
6) work fine with Astra 2012, 2.0 diesel
7) opel vectra c 2004 all ok.
8) Woks Ok for me in all modules ,the program update firmware but all is ok
I made a diagnose on all controlers of a corsa c 2001 z10 xe. And work fine.
9) Tested on Vectra b and it’s working like a charm.

09:10 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

17/06/2016

(Solved) Kess v2 fw4.036 External exception EEFFACE and Invalid protocol file

Kess v2 fw4.036 Ksuite V2.22 ( Item No. SE87-D at obdexpress.co.uk) gets any of these 3 error messages "Invalid protocol file", "External exception EEFFACE", or "no protocol found" after format the SD card. How to solve them? Following parts will offer tested working solution. Hope it helps.

Part 1: EXTERNAL EXCEPION EEFFACE
For those users who have Kess V2 master Ksuite V2.22 (Item No. SE87-D), a part of users may get a common error “EXTERNAL EXCEPION EEFFACE"?

ksuite external excepion eefface.jpg
(Tested) 100% working Solution:
Download file "Driver_USBDEVICEDRV.zip" I uploaded at mega.nz and then setup, usually the problem will be fixed
https://mega.nz/#!FEBHRRjS!KApCf3gl3RSOoSxPvy7ZcDpcciAFtS...
Note: This file is safe to download.

A little percent of users may have no luck, then download one more fixup software "kess v2 fixusb (se87-d) " and then setup.
https://mega.nz/#!oVRG1YLZ!hABNRfbSXgd-EexPCKX6nWPv1_cNga...
Hope it is helpful

Setup Tips (Important):
If Kess v2 fw4.036 v2.22 is not working, you are strongly advised to install our supplied working Setup 1.93 selfinstall.rar”, if you keep on installing the higher version of software, just copy the program you installed on C:// and save, then install “Setup 1.93 selfinstall.rar” , finally replace the same file in Local disk C: with the newly saved data; then it will work

Part 2: Kess v2 fw4.036 Invalid protocol file
Question: I have kessv2 software 2.08 fw 4.036 and if selected siemens PCR2.1 or siemens simos 10.12 write me message *Invalidprotocol file* tested ecu MED17.5.5 and this working fine

Working solution (Tested):
Option 1: Maybe some steps are not needed but I do like this:
(Note: to test this way is at your risk if you use KESS V2 ksuite V4.036 from obd2express.co.uk)
Do all steps to firmware update -> Done -> Connect kess to PC again -> run “Kess v2 Token Resetter”with protocol corrections -> (Then need push two button) PUSH "KESS protocol Update Loader" and wait ~ 5-10 sec until winrar end working ->PUSH KESS protocol update start(program will start and update your sd card again) -> all done

Option 2: I have solved invalid protocol by formatting sd with some format program (EASEUS partition master) and not windows. Now all ok.

Part 3: get "no protocol found" after format the SD card
Usually, some users may format the SD card at any reason, then get "no protocol found", the fast way they think is to get new program online, actually you are supposed to have one new customized SD card from the factory not directly get software online.

10:30 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)