topblog Ivoire blogs

04/04/2016

How to connect Lauch EasyDiag adapter

Here’s Lauch EasyDiag mux connection instruction. Hope this helps.

easydiag-unit.jpg

NOTE:
1. Remove connector once testing and/or diagnosis is complete;
2. Maybe it is difficult to plug or unplug connector in some vehicles because of the varied position of the DLC, but auxiliary connector can help you to avoid this problems.
3. Please turn off the ignition switch before connecting and then turn the key to the ON position after the EasyDiag has been plugged in.

Steps to connect:
Step 1: Locate the vehicle’s DLC socket. It is usually located under the dashboard, towards the driver’s left knee area.

Step 2: Plug the EasyDiag connector into DLC socket. The connector’s power indicator will light up to signify communication and you will hear an audible beep.

connect-easydiag.jpg

10:24 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

01/04/2016

How to diagnose with Lauch EasyDiag Bluetooth reader

This is the instruction on how to diagnose (read & clear faults, read data stream) with Launch EasyDiag code reader.

easydiag-mux.jpg

**Preparation
Before diagnosis, please confirm the following word has completed
1. EasyDiag has registered
2. Diagnostic software has downloaded
3. EasyDiag has linked with vehicle
4. EasyDiag has connected with Android equipment via Bluetooth.
5. The ignition switch is ON position.
(for all above, please refer to HOW TO USE LAUNCH EASYDIAG)

**Diagnosis
select Account, then select the serial number,

launch-easydiag-diagnose (1).jpg
Select a car brand you need to diagnose;
Here, take “demo” as an example
Click”Demo”, system will prompt you to pair Bluetooth.

launch-easydiag-diagnose (2).jpg
NOTE: The serial number of the connector can not be seen until the ignition switch is on.
Select product Serial Number (96679xxxxxxx) to pair.
Select demo again and select software version.

launch-easydiag-diagnose (3).jpg
After selection, system will start to initialize.
NOTE: the following diagnosis operation would be varying with different vehicle model, please follow prompts to operate.
initialization is complete

launch-easydiag-diagnose (4).jpg
Select Demo to go into vehicle’s system selection.
Click the arrow icon, quit Demo.

launch-easydiag-diagnose (5).jpg
Select the desired system. Here, take engine as an example.

launch-easydiag-diagnose (6).jpg
Read trouble code

launch-easydiag-diagnose (7).jpg
Clear trouble code

launch-easydiag-diagnose (8).jpg
Read data stream

launch-easydiag-diagnose (9).jpg

launch-easydiag-diagnose (10).jpg

launch-easydiag-diagnose (11).jpg

launch-easydiag-diagnose (12).jpg
Start to record: the system will record data in real-time and
generates a text report.
Generate current Text Reports: save the current time data in text
form.
Generate Screenshot Reports: save the current time data in
screenshot form.

10:50 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

30/03/2016

2016.3 ICOM A2 Rheingold ISTA+ New Features

This is the update information of ICOM A2 B C with latest 2016.3 software ISTA+ for BMW vehicles to the 2016 year.

Software version
ISTA-D 3.54.12
ISTA-P 3.58.0.500

New feature 1
ISTA+ as the new name
ISTA+ is the new name of ICOM software, instead of ISTA-D (Rheingold)

2016-ISTA+-update-1.jpg

New feature 2
Add 2016 7 series G11, G12 cars

2016-ISTA+-update-2.jpg

2016-ISTA+-update-3.jpg

2016-ISTA+-update-4.jpg
(G12 new models)

2016-ISTA+-update-5.jpg
(740Li EUR, USA)

2016-ISTA+-update-6.jpg
(740Li EUR)

New feature 3
Support BMW made in USA.
BMW USA cannot be supported at BMW 4S shop, so these BMW cars made in USA can only be diagnosed and programmed with 2016 ISTA+ with icom a2.

For 2016 ISTA+ update,
For 2016 ICOM A2 with ista+,

v20163-icom-ssds-1.jpg

v20163-icom-ssds-2.jpg

v20163-icom-ssds-3.jpg

v20163-icom-ssds-4.jpg

v20163-icom-ssds-5.jpg

v20163-icom-ssds-6.jpg

v20163-icom-ssds-7.jpg

v20163-icom-ssds-8.jpg

v20163-icom-ssds-9.jpg

10:47 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)