topblog Ivoire blogs

15/03/2016

Firmware 1.59 Opcom OP-Com 2012V setup instruction

Here is the step-by-step instruction on how to setup Firmware 1.59 Opcom OP-Com 2012V software.

Software: V2012

Firmware: V1.59

Language: English. (If you need german, please choose SP12 OPCOM German version.)


How to setup Firmware 1.59 Opcom OP-Com 2012V software:

1.create a folder named [op-com] at the desktop.

op-com-setup-instruction-1

2.open [op-com] CD.

op-com-setup-instruction-2

3.set up “op-com EN exe”.

op-com-setup-instruction-3

op-com-setup-instruction-4

4. Destination folder (Please select the folder, in which OP-COM will be installed), here you select the blank folder “op-com” you just now created in the desktop.

op-com-setup-instruction-5

op-com-setup-instruction-6

5.open “op-com” folder in your desktop.

op-com-setup-instruction-7

op-com-setup-instruction-8

6. Open the CD and copy the “OPCOM090714_EN_Crack.exe”, then paste them into the folder of “op-com” in the desktop.

op-com-setup-instruction-9

7 .connect op-com interfaces to your PC, then it will tell you to setup op-com driver, please select the second option and click “Next”.

op-com-setup-instruction-10

8, select the destination folder for driver setup.

op-com-setup-instruction-11

op-com-setup-instruction-12

op-com-setup-instruction-13

op-com-setup-instruction-14

op-com-setup-instruction-15

op-com-setup-instruction-16

9. finish setup driver, now check op-com driver location “My computer=management= device management=USB”, if op-com driver location shows as follows, that means it is ok now.

op-com-setup-instruction-17

10. Open “OPCOM090714_EN_Crack.exe” under the folder of “op-com” on the desktop, ready to activate software. Com not found, because the software is not activated.

op-com-setup-instruction-18

11.Click “Settings”.

op-com-setup-instruction-19

12.Click “test interface”, run activation program.

op-com-setup-instruction-20

13.activation program runs well and get Serial Number, “Save Config”, “close” Serial Number.

op-com-setup-instruction-21

14.Select “diagnostics”.

op-com-setup-instruction-22

op-com-setup-instruction-23

15.select protocol to diagnosis.

op-com-setup-instruction-24

16.pass the protocol, select “diagnose ECM”.

op-com-setup-instruction-25

17.Read fault codes.

op-com-setup-instruction-26

op-com-setup-instruction-27

More information:http://www.obdexpress.co.uk/wholesale/opcom-op-com-2010-v...

06:51 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

10/03/2016

SKP900 Auto Key Programmer Customer feedback

skp900.jpg

This is the SKP900 car tested by our customers and feedback:

Here is for USA cars

2013 CHRYSLER 200 - WORKS FINE
2008 DODGE CHARGER - WORKS FINE
2013 FORD EDGE - WORKS FINE
2011-2013 FORD F-150 - WORKS FINE
2013 MUSTANG - WORKS FINE

2012 JEEP COMPASS - WORKS FINE
2008 JEEP WRANGLER - WORKS FINE
2014 KIA RIO - WORKS FINE
2013 KIA SOUL - WORKS FINE
2013 KIA FORTE - WORKS FINE

2009 TOYOTA CAMRY - WORKS FINE, REMOTE + TRANSPONDER SEPERATE PROCEDURE BOTH WORKS
2012-2013 TOYOTA CAMRY - WORKS FINE, REMOTE + TRANSPONDER SEPERATE PROCEDURE BOTH WORKS
2013 TOYOTA HIGHLANDER - WORKS FINE, REMOTE + TRANSPONDER SEPERATE PROCEDURE BOTH WORKS

2002 VOLKSWAGEN GTI - WORKS FINE

2005 - NISSAN 350Z - WAS ABLE TO PULL BCM BUT COULD NOT PROGRAM KEY. I THINK JUST NEED TO PLAY WITH IT LONGER
2013 FORD FOCUS - DOES NOT WORK
2014 FORD FIESTA - DOES NOT WORK
Can do all keys lost with every car mentioned.

Customer asked functions:
Q: Can i use this SuperOBD SKP-900 to map ECU or program immobilizer?
A: No. This one only can program keys. Do not have other function. If you want to have other function besides program key, you can choose the key pro m8.

Q: How do i know there is no tokens left and i need to charge tokens?
A: When you use SKP-900 to program keys, and meet this prompt "Can be used o times add it in main menu add times function [NO] back", then you need to charge the tokens on official website.

Q: Can i use SKP900 to program used smart key?
A: If you can use other programmer to erase the key clearly, then can use this SKP900 to program.

08:43 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

09/03/2016

How to update CAN CLIP V154 to V156

Renault diagnostic interface CAN CLIP 156 has been released. Here is the update and installation guide for can clip 156.

CAN CLIP interface with the following pcb.jpg

Workable device:
We only tested CAN CLIP interface with the following pcb

Operating system:
Windows xp

Free download
CAN CLIP V156.RAR

How to install CLIP V156 on WINDOWS XP system:

Insert CAN CLIP 156 disk and open it.

copy folder Activation(Patch V3) to Desktop
open Crack Renault CLIP
Register Editor: click Yes.
Click OK.
Click OK.
close folder Activation(Patch V3)

open setup in CAN CLIP 156 disk
Click the laptop icon (FIRST INSTALLATION) in CLIP V152 interface.
Click "I accept...agreement" and click Next.
Select country. (if no, select OTHER COUNTRY). and click Next.
Select language and click Next.
Click Next.
Click Next to begin copying files.
Click Next to install Windows Resource Kit Tools.
Click I Agree to continue.
Click Next.
Click Installing now.
Installing...
Successfully install the Windows Resource Kit Tools. Click Finish to exit.
automatically operation by the system....
Restart your computer.
NOTE: After the computer reboots, this window pop up and automatically install. Do not cancel software but let it go on.
installing...
Click Finish for installing CLIP.

can-clip-156-(1).jpg
Right click "CLIP" on Desktop for Properties.
Click Find Target...
Cut "RSRWin" in C:CLIP_X91LibApplication, to paste on Desktop.
Open "Activation(Patch V3)" on Desktop, to copy "RSRWin" to C:CLIP_X91LibApplication.
Then open the new "RSRWin" in C:CLIP_X91LibApplication.
Click to tick for "I understand and accept..."
Click Register me now.
Are you pert of the Renault Network? Select No.
Enter the unlocking code with the picture guide Renault Clip Registeration Step 4 in the folder Activation(Patch V3)

can-clip-156-(2).jpg
then click Confirm.
Registration successful: click OK.

can-clip-156-(3).jpg
replace "RSRWin" in C:CLIP_X91LibApplication with"RSRWin" on Desktop
close CLIP Properties

found new hardware wizard: select Next
click Finish
go to Computer management
select Device manager->Bosch automotive service solution device->18-alliance vehicle communication interface

can-clip-156-(4).jpg
close Computer management

open CLIP on Desktop
...
update information v156, click OK

can-clip-156-(5).jpg
Select Vehicle type, After-sales type, Engine type, Gearbox type. Enter RO.

can-clip-156-(6).jpg
Then click COMPUTER TEST.

can-clip-156-(7).jpg

can-clip-156-(8).jpg

can-clip-156-(9).jpg


...
Diagnosis complete
Quite CLIP interface

11:04 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)