topblog Ivoire blogs

22/09/2015

How to install opcom clone VAUX-COM 120309a on Win 7

China clone Op-com firmware 1.45 and 1.59 diagnostic intefaces software has updated to VAUX-COM 120309a suppoet Opel& Vauxhall from 1992 to 2012. New VAUX-COM 2012V software can be installed on Win 7. Here is the step-by-step software installation guide. 

 

Free download OPCOM VAUX-COM 120309a software & Video 

https://mega.nz/#!ikU1yJ5C!m_uf736ecLNQRZ0EpqGFsH9yJEbRDp...

 

Software version: VAUX-COM 120309a

VAUX-COM 120309a-1.jpg

Operating system: Windows XP/Windows 7

Firmware: Opcom V1.45/V1/59 

Language: English 

 

VAUX-COM Win 7 install tips:

1) dotnetfx35_SP1 patch must be installed on Win 7 O/S. 

2) Run software as Administrator. 

 

Installation instruction on Win 7:

1.Install Software 

Open Computer 

Open VAUX-COM-120309a DVD/CD-RW Drive or open free software file

VAUX-COM 120309a-2.jpg

Open VAUX-COM-120309a software 

VAUX-COM 120309a-3.jpg

Accept license agreement 

VAUX-COM 120309a-4.jpg

Click “Install” to install software 

Installation progress, extracting file to C:/VAUX-COM-120309a+131223d file 

 

2. Install Driver 

Click “Extract” to extract FTDI CDM Drivers 

VAUX-COM 120309a-5.jpg

Connect op-com cable with computer, system will install driver automatically

VAUX-COM 120309a-6.jpg

Right click Computer>>Manage>>Device Manager>>Universal Serial Bus controllers>>USB Serial Converter to check if opcom driver is well installed  

VAUX-COM 120309a-7.jpg

3.Configure VAUX-COM

Right click VAUX-COM120309A+131223d GB software on desktop, select “Run as Administrator”

VAUX-COM 120309a-8.jpg

Loader has been installed into target 

Open VAUX-COM 2012V software 

Click “Settings” option 

VAUX-COM 120309a-9.jpg

Select Interface type: VAUX-COM Revision B, B+

Then click “Test Interface” button 

VAUX-COM 120309a-10.jpg

Then software will display firmware version, interface test ended successfully 

Press “Save Config” to save settings 

Press “OK”

VAUX-COM 120309a-11.jpg

4.Diagnose with OCPOM 

Connect Opcom interface with vehicle 

Back to VAUX-COM main menu 

Select “Diagnostics”

Select “Automatic Vehicle Identification”

VAUX-COM 120309a-12.jpg

Select “KWP-2000” and diagnostic connector

Open will auto detect and display vehicle information 

VAUX-COM 120309a-13.jpg

Start to diagnose your vehicle.

21/09/2015

Procedure:using BMW Rheingold ISTA with USB K+D-CAN cable

This post is about how to use BMW Rheingold ISTA with USB K+D-CAN cable, considering USB K+D-CAN cable is much cheaper then BMW ICOM, it is cheap investment.

 

Tools to need:

BMW Rheingold ISTA

USB K+D-CAN cable

 

Step-by-step instruction:

1. Plug your K+D-CAN cable and install drivers. For FTDI based cables use latest drivers.

2. Open "Device Manager", then USB Serial Port properties, go to "Port Settings" tab and click "Advanced…". Change Port Number to "COM9" and latency timer to "1". Confirm configuration via "OK" button.

rheingold-01.jpg

rheingold-02.jpg

3. Open C:EDIABASBINEDIABAS.INI with Notepad and check for "Interface=STD:OBD". In TCP settings set "Port=6801".

rheingold-03.jpg

rheingold-04.jpg

4. Open C:EDIABASBINOBD.IN with Notepad and check for "Port=Com9".

rheingold-05.jpg

5. Connect car with K+D-CAN cable to PC.

6. Now run BMW Rheingold ISTA using shortcut in start menu and wait until it boots, then press settings button.

rheingold-06.jpg

7. Select "VCI Config" tab and "Ediabas standard settings(ediabas.ini)", then "OK".

rheingold-07.jpg

8. Go "Operation", then "Read out vehicle Data" and " Complete Identification".

rheingold-08.jpg

rheingold-09.jpg

rheingold-10.jpg

11:52 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

16/09/2015

How to add more car models for FVDI software

FVDI Commander support Mitsubishi models for standard diagnostics, Read/program ECU, Key programming via OBDII, Modify odometer in EEPROM dump from dashboard, Clear Crash Data from Airbag.

 

If you have bought FVDI Mitsubishi whole package, you want to buy FVDI ford software, and add this ford software to your mitsubishi software, then use can use your device to work on mitsubishi and ford models. How to do this?

 

1 Every device has the serial number. After you make payment for Ford software. Please give the serial number of your device to us. We will send it to factory and let them to produced the ford software based on your device. Then send the new software CD to you.

 

2 After you get the CD, install the software, then follow the following way to update your tool

1) Connect the hardware of FVDI with your computer via USB cable. (No need to connect it with your car)

2) Insert the CD to your computer. Find this CD on your computer, open folder “FW Downloader”,  then doble click “FWDownloader.exe”, then this software will fun automaticlly.

fvdi-software-mitsubishi-update-1.jpg

3) Then you will see two options: If you want to update the firmware. Then choose "Firmware". If you want to update license data, then choose "Database".

fvdi-software-mitsubishi-update-2.jpg

fvdi-software-mitsubishi-update-3.jpg

4) Click button “Start” to start updating

fvdi-software-mitsubishi-update-4.jpg

5) After updating ready, click "Exit".

fvdi-software-mitsubishi-update-5.jpg

Then new models is added ready.

Perhaps you also interested in the following articles
2015 FVDI ABRITES V6.3 free software and video on Win 7 32bit
Johnson Control BSI goes into bootmode not killed by FVDI
SVDI VAG commander error solution and technical support

08:54 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)