topblog Ivoire blogs


New Genius/K-touch With FGTech Galletto 2 for €359

Now buy New Genius ECU Hand-Held Chip Tuning Tool, you will get FGTech Galletto 2 for free,Until FGTech Galletto 2 is no stock in


New Genius/K-touch:€359+Shipping

FGTech Galletto 2:€27.99+Shipping


New Genius/K-touch + FGTech Galletto 2:€359+Shipping

New Genius & Flash Point OBDII/BOOT Protocols ECU Hand-Held Chip Tuning Tool


1) Handheld KESS V2 version, more easily and convenient to use

2) Adds more new ECUs than KESS V2

3) Firmware 5.005.003

4)Multi-language: English, Italian, German, French, Spanish, Portuguese and Hungarian

5)Unlited tokens version.

It has the tokens reset button on the back of main unit. Just click this button and token will be charged.


New genius ECU tool supported ECUs list

FGTech Galletto 2-Master EOBD2 New Add BDM Function:

FGTech Galletto 2.jpg

1. Software Version: V2012

Hardware Version : V50

2. Update: By Email

3. Support BDM Function

4. Languages: English, Italiano, Deutsch, Francais, Espanol, Portuguese, Czech, Turkish

Fgtech galletto 2 eobd car list

Fgtech galletto 2 motorbyke list

Fgtech galletto 2 truck tractor list

FGTech Galletto 2 PCB Board display:



More information:


Opinions on BMW ICOM vs. BMW K+D CAN scan tool

This post collects some piece of opinions from experienced technicians on BMW ICOM and BMW K+D CAN scan tool, hope it helps.


Opinion1: A DCAN lead can do most things, but the ICOM is better with ISTA/D or ISTA/P


Those programs expect an ICOM unit, with the optical connector.


Most of the jobs can be done one by one with a Dcan lead, but ICOM is handier if you come across different cars.


With an ICOM and ISTA/D for example, you can plug into anything from an 8 series to an i8 and it will do everything automatically.

DCAN leads might need to be set up in K line, CAN mode, and wouldn't work on older cars that need an ADS interface.


Opinion 2. One of the real differences is that with a K+D Can cable access to some 663 (professional) radio modules is not possible whereas with ICOM can always communicate to this module. You'll encounter this problem using NCS Expert.


Opinion 3. Unless you are working on a lot of different BMW's professionally, ICOM is a waste of money. a $20 K+Dcan cable will do everything you need to do on a 2007 328....


Opinion 4. Icom is more reliable for flashing modules too. Less chance of getting a security access error


How to install opcom clone VAUX-COM 120309a on Win 7

China clone Op-com firmware 1.45 and 1.59 diagnostic intefaces software has updated to VAUX-COM 120309a suppoet Opel& Vauxhall from 1992 to 2012. New VAUX-COM 2012V software can be installed on Win 7. Here is the step-by-step software installation guide. 


Free download OPCOM VAUX-COM 120309a software & Video!ikU1yJ5C!m_uf736ecLNQRZ0EpqGFsH9yJEbRDp...


Software version: VAUX-COM 120309a

VAUX-COM 120309a-1.jpg

Operating system: Windows XP/Windows 7

Firmware: Opcom V1.45/V1/59 

Language: English 


VAUX-COM Win 7 install tips:

1) dotnetfx35_SP1 patch must be installed on Win 7 O/S. 

2) Run software as Administrator. 


Installation instruction on Win 7:

1.Install Software 

Open Computer 

Open VAUX-COM-120309a DVD/CD-RW Drive or open free software file

VAUX-COM 120309a-2.jpg

Open VAUX-COM-120309a software 

VAUX-COM 120309a-3.jpg

Accept license agreement 

VAUX-COM 120309a-4.jpg

Click “Install” to install software 

Installation progress, extracting file to C:/VAUX-COM-120309a+131223d file 


2. Install Driver 

Click “Extract” to extract FTDI CDM Drivers 

VAUX-COM 120309a-5.jpg

Connect op-com cable with computer, system will install driver automatically

VAUX-COM 120309a-6.jpg

Right click Computer>>Manage>>Device Manager>>Universal Serial Bus controllers>>USB Serial Converter to check if opcom driver is well installed  

VAUX-COM 120309a-7.jpg

3.Configure VAUX-COM

Right click VAUX-COM120309A+131223d GB software on desktop, select “Run as Administrator”

VAUX-COM 120309a-8.jpg

Loader has been installed into target 

Open VAUX-COM 2012V software 

Click “Settings” option 

VAUX-COM 120309a-9.jpg

Select Interface type: VAUX-COM Revision B, B+

Then click “Test Interface” button 

VAUX-COM 120309a-10.jpg

Then software will display firmware version, interface test ended successfully 

Press “Save Config” to save settings 

Press “OK”

VAUX-COM 120309a-11.jpg

4.Diagnose with OCPOM 

Connect Opcom interface with vehicle 

Back to VAUX-COM main menu 

Select “Diagnostics”

Select “Automatic Vehicle Identification”

VAUX-COM 120309a-12.jpg

Select “KWP-2000” and diagnostic connector

Open will auto detect and display vehicle information 

VAUX-COM 120309a-13.jpg

Start to diagnose your vehicle.