topblog Ivoire blogs

06/06/2017

OBDSTAR F109 Program Suzuki Swift 2006 ALL KEY LOST

Here is the toturial on How to use the obdstar f109 SUZUKI key programmer program a new keys to Suzuki Swift 2006 when it  all key lost

 

 

Purpose:

Program a new key

 

Model:

Suzuki Swift 2006 diesel

 

Remaining keys:

0, ALL KEY LOST

 

Tool in use:

obdstar-f109

 

Obdstar f109 can do all key lost for Swift 2006?

In the Obdstar F109 Suzuki Car List, Swift is listed- read fault codes, erase DTC, do ECU identification, do all key lost…all OK.

obdstar-f109-SUZUKI-Pin-Code-Calculator-car-list

 

 

How to add a new key to Suzuki Swift 2006 using Obdstar F109:

Connect the F109 key programmer the port port on the car

Power on the key programmer

Go to function->immo

Select Suzuki->Swift

How to OBD program a new keys to Suzuki Swift 2006 all key lost (1)

 

 

 

Other

How to OBD program a new keys to Suzuki Swift 2006 all key lost (2)

 

 

 

05-

How to OBD program a new keys to Suzuki Swift 2006 all key lost()03

 

 

All key lost

How to OBD program a new keys to Suzuki Swift 2006 all key lost(4

 

 

 

After perform this function, all keys will be erased

How to OBD program a new keys to Suzuki Swift 2006 all key lost(5

 

 

 

Input value: 0408

How to OBD program a new keys to Suzuki Swift 2006 all key lost(6

 

 

 

If you meet “security code wrong”, please input value:0000

 

How to OBD program a new keys to Suzuki Swift 2006 all key lost(7

 

 

 

Continue to finish Suzuki key programming

 

Result:

Successfully program a new keys to Suzuki Swift 2006, via OBD

04:05 Publié dans Blog, Shopping, Web | Tags : obdstar f109 | Lien permanent | Commentaires (0)

02/06/2017

How to install OPCOM VAUX-COM 120309a software on WIN10

This toturial is about  how to step by step install OPCOM diagnostic interface VAUX-COM 120309a software driver on Windows 10, especially for those troubled with “OP-COM usb is not detected on Windows 10”.

Run VAUXCOM.exe

Allow this app to make changes to your device

OPCOM VAUX-COM 120309a software on WIN10 (1)

 

Go to Settings in VAUX-COM 120309a

吧   OPCOM VAUX-COM 120309a software on WIN10 (2)

 

Test interface

test-interface

 

Connect the interface to the USB port, or install the USB driver

install-usb-driver

 

Close VAUX-COM 120309a

Opcom Computer management

Launch the troubleshooter

launch-the-troubleshooter

 

Again, open Computer management

Uninstall USB Serial Converter

Uninstall-USB-Serial-Converter

 

Disconnect the internet

Update driver- OP-COM USB V2

install-driver-op-com

 

Browse my computer for driver software

 

browse-driver-software

 

browse-driver-software 2

 

browse-driver-software 3

 

browse-driver-software 4

 

browse-driver-software 5

 

browse-driver-software 6

 

browse-driver-software 7

 

browse-driver-software 8

 

Continue installing this driver

install-this-driver

 

usb-driver

check-connection

 

Again, run VAUXCOM.exe as administrator

Allow this app to make changes to your device

Go to Settings

Then Test interface

Firmware version tested successfully

firmware-tested

 

Apply settings

apply-setting

Go to Diagnostics

go-to-diagnosis

select-vehicle

select-car-to-test…

Successfully install Op-Com on Windows 10!!

Source:http://obdexpresscouk.blogspot.com/2017/06/how-to-install...

 

 

www.hobdii.com

08:24 Publié dans Blog, software download, Web | Tags : opcom | Lien permanent | Commentaires (0)

01/06/2017

How to setup SDconnect C4 wired connection to PC

This is how to connect SD Connect C4 with Xentry 2014, that failed to registrer my multiplexer and hasn’t LAN connecting into a SD connect.

 

 

 

 

 

Solution... here you go.


You should connect " Wired LAN " MUX to your PC.

Then switch a your PC's icon " wired " .

Changed --> to next ( uploaded configuration movie ) pass : our major pw.

Not changed --> check you wired LAN driver and cable.

Many troubles had SD connect wired LAN module.

If OK your PC and cable

sdconnect_config000:

https://mega.nz/#!bo92ySQB!ajjQoIrVWXS4TmNO5PnDFF31gY7EQF...  If it doesn’t work, try to reinstall " SD net control "

 

Good luck.

 

 

http://blog.mbstartool.com/2017/06/01/how-to-setup-sdconn...