topblog Ivoire blogs

20/03/2017

2017.03 SDconnect C4 Xentry/DAS Questions and Answers (FAQ)

Here are the most frequently-asked questions from SD connect C4 users and professional answers from engineers working for obdii365.com. Hopefully, it helps those in trouble.

 

Q: How to change the Xentry language?

A: Go to Setup, select Setting language, then choose a language and click on Accept.

xentry-change-language

Q: How to setup the DAS language?

A: Go to DAS Properties. In the Target, change the last two letters (which is the first two letters of the language). Then click on OK.

das-change-language

Q: Xenry language error: A fault has occurred.

A: Change the PC date and time to be the same as the Xentry version.

E.g. Your Xentry is version 2015.09, you need set up 2015.09.05 in your PC.

xentry-language-error

Q: Fault (30.3) pops up after DAS activation. No valid DAS license; DAS will now be closed.

A: Go to local disk C:/programme files/Mercedes-Benz/StartKeyCenter2; find our StartKeyCenter.exe

If DAS doesn’t expire, just change the bin file in C:/programme files/Mercedes-Benz/DAS

If DAS expires, you need Lan-id to activate DAS

no-valid-das-licenseno-valid-das-license

Q: Xentry cannot run, the icon displays then disappears.

A: Change the PC date and time to be the same as the Xentry version;

If it does not work, replace the bin file in C:/programme files/Mercedes-Benz/DAS (the bin file differs from Xentry versions)

If all above fails, send the mercedes software hard disk to the vendor to re-copy files.

xentry-cannot-run

Q: SD connect c4 firmware files are lost and WIFI cannot be set up.

A: It means your sdconnect firmware files are deleted and you need update sd c4 firmware.

Files need to update (ORDER!!!!!!):

02_CSD_2_10.zip

01_Boolimage_2_3.zip

03_PmPic29_Cpld23.zip

 

Sd connect c4 firmware update manual:

 

Note: please prepare new batteries and an OBD cable for use; if it fails to connect to the vehicle, replace it with the OBD 12V power; otherwise, it would pop up error 662 (update fails.)

sd-coonect-firmware-program-lostsd-coonect-firmware-program-lost-1sd-coonect-firmware-program-lost-error-204-2sd-coonect-firmware-program-lost-solution

Q: SD connect Tool kit appears Error 749 in Administration.

Due to network problems, no connection to the SDconnect can be establish (749)

No SDconnect is selected or the desired SDconnect cannot be selected

A: It results from incorrect IP setup. Please go to the network connect to WLAN set up IP: 172.29.127.119

sd-coonect-error-749

Q: Xentry error 2221-45: No access authorization code!

[2221-45] No access authorization for XENTRY diagnostics was found on the server. You must contact the user help desk.

A: Go to C:/programme files/Mercedes-Benz/Xentry/fusoko/eclipse/plugins; delete the file “com.damler.xentry.diagservice_1.6.0.201607181047”

xentry-error-2221-45

 

xentry-error-2221-45-solvedQ: Xentry cannot open for use even reopen Xentry or restart the PC after activation.

xentry-no-access-authorization-code

No access authorization code! You must contact the user help desk.

A: Go to C:/programme data/LicDir; delete lic-key2.dat

Open StartKeyCenter on Desktip; activate Xentry

Get a new lic-key2.dat after Xentry activation; copy and paste lic-key2.dat; then rename it as “lic-key2.x4711” (setup the file properties)

 

 

Q: EWA-NET file cannot start.

A: Go to the Start menu, then EWA-NET Admin Tool

In EWA Admin Tool, Server, EPC, WIS all should start (if they have started yet, pls. stop and restart)

Server, EPC, WIS restart, reboot the PC, then open EWA-NET to login

EWA-NET-cannot-start

xentry-no-access-authorization-code-solved-1xentry-no-access-authorization-code-solved-2Q: Xenry Error (1.2)-2.503.13003:

Initialization of diagnosis multiplexer failed

Possible causes:

The link between the diagnosis multiplexer an the

diagnostic socket is interrupted

The link between the diagnosis multiplrxer an the

diagnostic unit is interrupted.

The voltage supply at the diagnostic socket (circuit30

and(or) circuit31)is fault.

Note:

When using SDconnect, check the connection status

using the Toolkit.

A: check the connection of the cable and the car;

Then check the wired&wireless IP setup

Then check the mercedes software; it’s SD C4 software, not C3

If all ok, it may result from the SD connect c4 mux or the cable

xentry-das-vehicle-communication-errorxentry-das-vehicle-communication-error-solved

09:41 Publié dans Blog, Shopping, Web | Tags : sdconnect c4 | Lien permanent | Commentaires (0)

18/03/2017

which car can be change mileage by OBDSTAR F104?

OBDSTAR F104  for Chrysler, Jeep, Dodge with Odometer ajustment and Pin Code Reader Function,The main unit system adopts ARM high speed chip to keep it running fast, stable and anti-jamming.

So,which car can change mileage by OBDSTAR F104?Can change Chrysler 300C odometer mileage with OBDSTAR F104?

This OBDSTAR F104 mileage support CHRYLLER & DODGE car list for you all,hope it has helps.

CHRYLLER & DODGE :

1500/200/2500/300C/300M/3500/Aspen/Avenger/Caliber/Caravan/Charger/Cherokee/Commander/Compass/
Concord/Dakota/Durango/Grand Cherokee/Interepid/Journey/Lhs/Liberty/Magum/Neon/New Sebring/Nitro/
Pacifica/Patriot/Pt Cruiser/RAM/Sebring/SRI/SX/TJ/YJ/CJ/Voyager/Wrangler/

Detail Information:

CHRYLLER & DODGE
1500
2002-2005
2000-2001
200
2015
2010-
2500
2003-2005
300C
2011-
-2010
300M
2001-2004
1998-2000
3500
2003-2005
Aspen
2006
Avenger
2010-
2007-2009
Caliber
2009-
2006-2008
Caravan
2012-
Charger
2011-
2004-
Cherokee
2015
Commander
2005-
Compass
2008-
2005-2007
Concord
2001-2004
1998-2000
Dakota
2004-
2001-2003
Durango
2014-
2011-
2007-2010
2004-2006
2001-2003
Grand Cherokee
2014-
2011-
2005-2010
2002-2004
Tnterepid
2001-2004
1998-2000
Journey
2008-
LHS
2001-2004
1998-2000
Liberty
2008-
2002-2007
Magnum
2004-
Neon
2001-
1999-2001
New Sebring
2007-
2003-2006
Nitro
2006-
Pacifica
2007-
2003-2006
Patriot
2006-
PT Cruiser
2006-
2002-2005
1999-2001
RAM
2011-
2009-
2006-2008
Sebring
2010-
2009-
2006-2008
SRI
SRI-5 2005-
SRI-4 2005-
SRI-3 2005-
SX
SX-2.0 2001-
TJ/YJ/CJ
2007
2003-2005
Voyager
2015-
2008
2001-2007
Wrangler
2007-
2003-2005

Source:http://www.mileageprogrammer.com/obdstar-f104-mileage-sup...

02:16 Publié dans Blog, Shopping, Web | Tags : obdstar f104 | Lien permanent | Commentaires (0)

15/03/2017

Xhorse ELV Emulator Test on BENZ W204 Feedback

Here is the review on XHORSE ELV Emulator for Benz 204  work with VVDI MB tool

1.Successfully used ELV emulator in W204:

1). EIS: read data by OBD from EIS/EZS …… OK

2). EIS: get erase password ……. OK

3). password calc.: get key password through calc. process and 1 token used ……OK

4). EIS: save all data of EIS ……. OK

5). EIS: renew EIS/EZS through IR ……. OK

6). EIS: load back saved data …….. OK

7). EIS: write data to EIS/EZS …… OK

8). EIS: personalize ELV emulator in EIS/EZS unit – success….. OK

9). EIS and ELV now working and car start

10). ELV emulator/simulator from Xhorse have sound (unlock and lock job) almost as original ELV

After all this steps still missed VIN in EIS/EZS, and fault in ESP because not see VIN from EIS,

then finished with XENTRY and write VIN to EIS/EZS in EIS/EZS unit finished…. OK

erase all faults ….. OK

I renew W204 ELV emulator only through 2x click…no need any data or passwords.

XHORSE Benz ELV Emulator

 

Original metalic W204 ELS/ELV unit renew is different process and steps…there you need erase passwords to have.

I unlock NEC from 3x blocked W204 ELV, i think it take 3-5 attempts, each delay 100-1000 times cca, don’t know exactly now…

only try….failed…try….failed….try….success.

 

2.The process to renew EIS for ESL/ELV personalizes described in VVDI MB BGA manual:

ESL Tools

Support read ESL data via OBD (K-Line) …… tested OK

Support renew ESL, make 2nd hand ESL to new one (online) ……. tested OK ( online get only erase pass )

Support replace ESL, you can write original ESL or EIS data to new ESL …… tested OK ( but key password is needed to have too )

Support write new VIN …… tested OK ( i write there 999999 and OK )

Support clear TP

Support auto personalized ESL, no need renew EIS ……not tested yet

Support check ESL damage status …… tested OK

Support repair W204 ESL NEC chip(fatal error: 0xAA) and Motorola ESL chip …… tested OK ( NEC chip only yet )

Support renew VVDI-MB W204 emulator …… tested OK

and on next page is:

Special Instructions (2016.05.29)

The newest cars after 2015 with FBS4 EIS don’t support read data and password, we are researching it

Renew EIS and renew ESL require erase password.

We are building a new server for erase password. It will support all erase password after new server finished

Auto personalized ESL: Now only support auto personalized ESL with key password all 00,

we will support all the passwords in future (You can use “Personalize W204 ESL” instead before we publish new version).

In ESL window, you can input crypto password for auto personalize (no need renew EIS).

Crypto password need calculate with other tools