topblog Ivoire blogs

08/02/2017

Comparison of TCS CDP PCB v3.0 v5.0 v6.0 v8.0

TCS CDP pro+ PCB has been updated and improved for several times. So, what’s the difference of TCS CDP PCB v3.0 v5.0 v6.0 v8.0 and how much do you know? Read the thread.

 

Now, it’s v8 pcb of TCS CDP +
v5 not work on nissan qashqai 2012 1.6 dci
v8 work well : v8 it’s better

sp122-c-tcs-cdp-pcb-bluetooth (2) sp122-c-tcs-cdp-pcb-bluetooth (1) sp122-c-tcs-cdp-pcb-bluetooth (3)

 

 

There are two kinds of v8 pcb:

V8 PCB with a high-quality Bluetooth module:

sp122-b-CDP-PRO-bluetooth-a

 

Source: http://www.obdexpress.co.uk/wholesale/tcs-cdp-pro-diagnos...

 

V8 PCB with a normal Bluetooth module:

sp122-c-CDP-PRO-bluetooth-b

Source: http://www.obdexpress.co.uk/wholesale/tcs-cdp-pro-diagnos...

 

it’s v6 PCB but same like v5

pcb-v6-same-as-v5

 

TCS CDP v5.0 PCB with zener diodes 30v

pcb-v5

 

V5.0 PCB original vs. copy:
original v5.0 (2x fake 9241A=lm393 installed, KL only, not KKL) needs 5v zeners installed, if removed KL line stop working.
Original v5.0

pcb-v5-original

V5.0 copy

pcb-v5-copy

pcb-v5-pinout

New 5.0 pcb vs. Old 5.0 pcb

removing or replacing d701 and d703 diodes in this new 5.0 pcb version

new 5.0 is supposed to work ok without modifying the zener diodes
because pcb is completely different to previous versions and diodes are supposed to work as they should

Previous v5

pcb-v5-old

 

New v5

pcb-v5-new

 

It was v5 became v3

pcb-v5-become-v3

 

Amazing !
How these two will fit “pin to pin” it’s a mystery for me. Unless your PCB board is a completely redesigned version.

PXB-SI8241-LM393

 

Pcb V5.0 vs. Pcb V3.0

with v3.0, 5v zeners must be just removed, or replaced with 30v zeners for trucks support
if modded v5.0 by robertdz is exactly = v3.0, again 5v zeners must be removed or replaced with 30v zeners.

 

different tracks and design

pcb3.0+5.0

Clipboard-3.0-5.0

in case v5.0 pcb was designed for lm393, pins 6 and 7 would shorted on both left and right ic’s

v5.0-lm393

Edit: tracks of 9241 on the right are all dead, no sense to replace it with another lm393, just the one on the left

 

NOTE: TCS CDP+ buying guide:

2014.R3 TCS CDP without Bluetooth

2015R3 TCSCDP Pro+ with Bluetooth

2015R3 TCS CDP+ PRO without Bluetooth

(New Design) 2015.3 TCSCDP Pro+ OBD2 scanner without Bluetooth

(New design) 2015.R3 TCSCDP Pro with Bluetooth and 4G Memory Card

 

 

 

 

https://www.obd2eshop.com/

02:24 Publié dans Blog, Shopping, Web | Tags : tcs cdp | Lien permanent | Commentaires (0)

20/01/2017

Kess v2 Ktag Gray buttons after Ksuite installation

Kess v2 Ktag Gray buttons after Ksuite installation,how to do ?

Professional solutions from obdexpress.co.uk....here you go...

 



 


ksuite v1.93 download on mega:

https://mega.nz/#!f8xQGLRA!8ZNod0YLAI-bY0rezjpthlBxyg-lzM...  

Working ok with:

SE87-D: V2.28 KESS V2 Firmware V4.036

SE80-B: KTAG Firmware V6.070 KSuite V2.1.3  

SE80-D: V2.13 KTAG KTM100 FW V7.003

Suitable for the ktag/kess v2 QC mark ends with numbers“015”

Not suitable for other kess or ktag programmers.

If you try on other version, obdexpress.co.uk hold no responsibility for your try.

 

How to solve:

1- cut the folder of kusite (v2.11) and paste it to Desktop

2- install ksuite v1.93 software

3- delete the ksuite folder in disk C:

4- cut the ksuite v2.11 folder on Desktop and paste it to C:

5- KTAG Firmware V6.070, KTM100 FW V7.003, KESS V2 Firmware V4.036 can work now!

  If not, contact to your vendor.

 

 

Good luck with ecu tuning!

 

 

Source:http://blog.obdexpress.co.uk/2017/01/20/kess-v2-ktag-not-...

 

 

 

http://www.obd2eshop.com

12/01/2017

Allscanner VXDIAG VCX HD Heavy Duty Truck Diagnostic

New Truck diagnostic tool arrival at obd2express,Allscanner VXDIAG VCX HD Heavy Duty scanner,can support  CAT,VOLVO,HINO,Cummins,Nissan.

Allscanner VXDIAG VCX HD Heavy Duty Truck Diagnostic designed to meet the industry standard of RP1210A/B.It is PC-to-vehicle interface compatible with multiple software applications.It is available to diagnose most of heavy trucks, Buses, Grabs, Cranes and Engineering Machines.
VXDIAG VCX HD Software: CAT, HINO, VOLVO, CUMMINS, NISSAN
Allscanner VXDIAG VCX HD Heavy Duty Truck Diagnostic

Allscanner VXDIAG VCX HD Heavy Duty Truck Diagnostic

Allscanner VXDIAG VCX HD Heavy Duty Truck Diagnostic

Allscanner VXDIAG VCX HD Heavy Duty Truck Diagnostic
 
 
Allscanner is available to diagnose most of heavy trucks, such as CAT, VOLVO, HINO, Cummins, Nissan. Also it can diagnose Buses, Grabs, Cranes and Engineering machine.
 
Main Function: Fault code diagnosis, maintenance guide, data stream reading, data resetting, PCM (ECU) reflashing
 
VXDIAG VCX HD Features:
 
1. Meet the industry standard RP1210 A/B
2. Optional  connectivity: USB wired and 802.11b/g WIFI wireless
3. The adapters and cables are durable.
4. Able to communicate and diagnose heavy and light trucks with 12V / 24V.
5. Hardware meet European CE and  American FCC requirements.
6. Support firmware update.
 
Compatible Protocols:
 
CAN125/CAN250/CAN500/CAN1000
SAE-J1939 CAN
SAE-J1708/J1587 On RS485
CAT DATALINK (Caterpillar)
ATA DATALINK (Caterpillar)
 
Compatible Software and Application:  
 
CATERPILLAR  V2010A/2010B
CUMMINS  V7.5
VOLVO  PTT1.12
ALLISON DOC V8.4
BENDIX  V6.3.8.0/V5.6.3.0
DETROIT DIESEL DDDL V7.05
EATON V3.2
INTERNATIONAL DLB/ICAP/IPTS/MASTER
MERITOR TRANSSOFT 2.1
PERKINS EST 2010B
TRIAL_ISUZU
HINO_EXPLORER V2.03
 
Software specification:
 
1.VCX HD driver program meets the industry standard of RP1210A/B
2.VCX HD  is a standard Passthru reprogramming tool, and can perform ECU reprogramming online.
 
VXDIAG VCX HD Specifications:
 
CPU:32bit 180MHz ARM CPU
Storage:1MByte
Cable Interface (PC):USB2.0
Network Interface (Optional): LAN 10/100M Ethernet
Wireless Interface (Optional): WLAN 802.11 b/g/n Wi-Fi
Diagnostic Interface:24PIN highly reliable and easy-swap interface to OBD-II 16PIN
Indicator Light:4 LED: Power, Wireless, Host and Vehicle.
Power: Vehicle power input: DC 9V-36V
Compatible: 12V&24V
Power Dissipation: 2W
Size :L x W x H = 175 x 110 x 45 (mm)
Weight: Device Weight: 0.6 Kg
Package: Weight: 2.3 Kg
Shell: Aluminum metal & Rugged plastic shell
Working Temperature: -20~+70 °C
Storage Temperature: -40~+85 °C
Standard Certification: Certification of Euro CE and US FCC
 

09:57 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)