topblog Ivoire blogs

12/07/2016

Renew Benz EIS and replace Benz ESL with VVDI MB BGA Tool?

In general, Benz electric steering locks (ESL) are used with EIS W204/ W207/ W212. ESL is damaged in high frequency. In this case, there are two possible reasons and solutions:

If the ESL motor is damaged, replace a new motor.
If the NEC chip of ESL is locked, renew EIS then replace ESL.

How to tell if the ESL motor is damaged or NEC chip is locked?

Open VVDI MB tool software. Click “Check ESL damage status”.

1.If it shows ESL works normally, generally it means the EIS motor is damaged and you need a new one.
Replace a new motor, what need to buy?

OEM MB ESL motor+ MB ESL dowel pin+ MB EIS removal tool

2.If it shows that ESL is damaged, then replace ESL.
This new ESL/ ELV emulator is recommended for your replacement:
http://www.obdexpress.co.uk/wholesale/vvdi-mb-elv-emulato...

How to replace ESL with VVDI MB Tool?
Step1.
To replace ESL, you need renew EIS at first, then re-write EIS and personalize ESL, in this way ESL is synchronized. To renew EIS, both key password and erase password are required.

Note: if you do not renew ESL first, but only personalize ESL, the ESL won’t be synchronized.

Get key password. You can increase key to get it.
Use VVDI MB NEC Key Adaptor to work with VVDI MB Tool to get key password.

Get erase password. In general, we can get the password directly with VVDI MB tool online calculation from server.
After input the two passwords choose “Infrared” as EIS communication way, then click “save EIS data”, Click “Renew EIS”.

Step2.
Now the EIS is full new, click “load EIS data”, click “Infrared” as communication way to enter new EIS data.
Click “OBD” as communication way to enter VIN.

Step3. Click “Personalize W204 ESL”

Step4.
After above steps, all EIS and ESL status checkboxes will be tick except the “Activated” checkbox. Insert the original car key hen EIS and ESL is activated. Now you use VVDI MB Tool to renew ESL successfully.

11:16 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

11/07/2016

Latest Released ECU Test Adapter for Benz in obd2express.co.uk

Benz ECU Test Adapter can work with following device:MB KEY OBD2 (SK194),VVDI Tool (SV30), NEC57(SK160, SK160-B), KTAG (SE80 series) and KESS V2 (SE87 series). As long as the ECU flashing tool supports CAN protocol and meanwhile supports these ECU types.

Support ECU Model:
CR3.XX
CR4.XX
CR5
CR6
CR60.XX
SIM271DE2.0
SIM4LKE
SIM271KE2.0
CRD.11
CRD2.XX
ME9.7
MED17.7.X
SIM266

Benz ECU Test Adapter connect kess v2:

benz-ecu-test-adapter-connect-kess-v2-1.jpg

Benz ECU Test Adapter connect vvdi2:

benz-ecu-test-adapter-connect-vvdi2-2.jpg

Benz ECU Test Adapter connect VVDI:

benz-ecu-test-adapter-connect-vvdi-3.jpg

Package including:
2pc x Benz ECU cable
1pc x CR3.XX Adaptor
1pc x CR4.XX Adaptor
1pc x CR5 Adaptor
1pc x SIM271DE2.0/CR6/CR60.XX Adaptor
1pc x SIM4LKE Adaptor
1pc x SIM271KE2.0 Adaptor
1pc x CRD.11 Adaptor
1pc x CRD2.XX Adaptor
1pc x ME9.7 Adaptor
1pc x MED17.7.X Adaptor
1pc x SIM266 Adaptor

benz-ecu-test-adapter-1.jpg

http://www.obdexpress.co.uk/wholesale/benz-ecu-test-adapt...

10:43 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

08/07/2016

Free download SKP900 v4.2 update bin file & update tool v2.4

How to update your SKP900 key programmer to the latest version 4.2? Free download SKP-900 4.2 software and update tool to begin your update here!

Free download
SKP900 V4.2 software:
http://superobd.com/SKP900V4.2.zip
Skp900 update tool v2.4:
http://superobd.com/UploadImage/20141815344369.rar
Skp900 usb driver:
http://superobd.com/UploadImage/20141311138756.rar

SKP900 v4.2 update plan:
1- DODGE RAM-1500 Smart Key Program
2- BUICK Excelle Remote Key Program 2015-
3- HUMMER H3 Remote Program
4- Chevrolet SAIL Remote Program 2015-
5- MAZDA CX-5 Add Smart Key Program
6- BUICK ENVISION Smart Key Program
7- TOYOTA Replace the new immo box Program
8- VW POLO Remote Program 2015-
9- Fiat Bravo Remote Key Program
10- Audi A4 Remote Program

How to update SKP900 key programmer to v4.2?
Connect skp900 to the laptop using a USB cable
Run the update tool, click OPEN to upen update bin file

skp900-update-tool-v2.4-1.jpg
Click Auto Scan Port to setup the COM port
Click UPDATE to start update

Updating for nearly 37 minutes
Don’t disconnect SKP900 when updating

Update success!

SKP900 v4.2 is ready for use.

skp900-v4.2-2.jpg

http://www.mileageprogrammer.com/

10:40 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)