topblog Ivoire blogs

06/04/2016

New arrival OEM Orange5 V1.34 Programming Device in obd2express

OEM Orange5 V1.34 professional programming tool is newly released at www.obdexpress.co.uk.

oem-orange5-professional-programming-device-1a.jpg

Orange 5 a professional progamming device for memory and microcontrollers,support for many softwares.Its unique feature is built-in macro language for writing down protocols, which gives fast and easy capability to add new types of micro schemes, precisely meeting manufacturers' requirements to read/write algorithms.

Software version: V1.34, software not support update.

Additional Supported Software:
Immo HPX 9V0
NEC V850ES/SJ3 V850ES/SG3 UART
NEC V850E2 NEW

Software Licenses:
MTRK (Included in Orange-5 base)
TMS (Included in Orange-5 base)
M08V NEW

Top 13 Reasons to Choose OEM Orange5:
1.Supports any COM ports, incuding virtual ones from 1 to 20
2.Works with text (ASCII) and HEX mode
3.Creating a list of commands that allows editing and fast sending
4.Fine-tuning the exchange rate
5.Saving files including command and port settings.
6.Saving incoming data in binary files
7.File transfer via serial port.
8.Delay settings for bytes and blocks
9."Echo" mode
10.Delay settings between incoming data
11.Managment of DTR, RTS chains, visualising DSR, CTS, CD, RI
12.Program doesn't need to be installed
13.Supports Orange5 programmer in emulation mode.

OEM Orange 5 supported car list:
http://www.obdexpress.co.uk/wholesale/oem-orange5-profess...

Package includes(including full set of adapter):
Orange-5 programmer 1
Power adapter 1
USBcable 1
Incircuit wire 10
SOIC8/DIP8 Expert adapter 1
SOIC8/DIP8 adapter 1
SOIC8_14_93Cxx adapter 1
SSOP8/DIP8 1
Lead with clips SOIC8 & DIP8 1
Adapter 05L28/05B 1
Adapter 908AS60/AZ60 QFP64 1
Adapter 68HC(7)05P3/E6 1
Adapter 05B/X_705B/X QFP64 V2 1
Adapter 11PA8/11E9 QFP64 1
Adapter 68HC05H12 1
Adapter 68HC11EA9 1
Adapter 908AS60 1
Adapter 9S12Dxx 1
Adapter 912Dxx 1
Adapter 9S12X 1
Adapter 912B32 QFP80 1
Adapter 68HC11F1 1
Adapter 68HC11L6 1
Adapter 68HC11KA4 1
Lead 11E9(20) with power 1
Lead for EWS3 mask 0D46J 1
Adapter TMS374C003A 1
Adapter MSP430F 1
Adapter 68HC11KA4 PLCC68 1
Adapter 908JL 1
Adapter PCF7941 1
Adapter 9S12XE 1

10:45 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

04/04/2016

How to connect Lauch EasyDiag adapter

Here’s Lauch EasyDiag mux connection instruction. Hope this helps.

easydiag-unit.jpg

NOTE:
1. Remove connector once testing and/or diagnosis is complete;
2. Maybe it is difficult to plug or unplug connector in some vehicles because of the varied position of the DLC, but auxiliary connector can help you to avoid this problems.
3. Please turn off the ignition switch before connecting and then turn the key to the ON position after the EasyDiag has been plugged in.

Steps to connect:
Step 1: Locate the vehicle’s DLC socket. It is usually located under the dashboard, towards the driver’s left knee area.

Step 2: Plug the EasyDiag connector into DLC socket. The connector’s power indicator will light up to signify communication and you will hear an audible beep.

connect-easydiag.jpg

10:24 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

01/04/2016

How to diagnose with Lauch EasyDiag Bluetooth reader

This is the instruction on how to diagnose (read & clear faults, read data stream) with Launch EasyDiag code reader.

easydiag-mux.jpg

**Preparation
Before diagnosis, please confirm the following word has completed
1. EasyDiag has registered
2. Diagnostic software has downloaded
3. EasyDiag has linked with vehicle
4. EasyDiag has connected with Android equipment via Bluetooth.
5. The ignition switch is ON position.
(for all above, please refer to HOW TO USE LAUNCH EASYDIAG)

**Diagnosis
select Account, then select the serial number,

launch-easydiag-diagnose (1).jpg
Select a car brand you need to diagnose;
Here, take “demo” as an example
Click”Demo”, system will prompt you to pair Bluetooth.

launch-easydiag-diagnose (2).jpg
NOTE: The serial number of the connector can not be seen until the ignition switch is on.
Select product Serial Number (96679xxxxxxx) to pair.
Select demo again and select software version.

launch-easydiag-diagnose (3).jpg
After selection, system will start to initialize.
NOTE: the following diagnosis operation would be varying with different vehicle model, please follow prompts to operate.
initialization is complete

launch-easydiag-diagnose (4).jpg
Select Demo to go into vehicle’s system selection.
Click the arrow icon, quit Demo.

launch-easydiag-diagnose (5).jpg
Select the desired system. Here, take engine as an example.

launch-easydiag-diagnose (6).jpg
Read trouble code

launch-easydiag-diagnose (7).jpg
Clear trouble code

launch-easydiag-diagnose (8).jpg
Read data stream

launch-easydiag-diagnose (9).jpg

launch-easydiag-diagnose (10).jpg

launch-easydiag-diagnose (11).jpg

launch-easydiag-diagnose (12).jpg
Start to record: the system will record data in real-time and
generates a text report.
Generate current Text Reports: save the current time data in text
form.
Generate Screenshot Reports: save the current time data in
screenshot form.

10:50 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)