topblog Ivoire blogs


How to add more car models for FVDI software

FVDI Commander support Mitsubishi models for standard diagnostics, Read/program ECU, Key programming via OBDII, Modify odometer in EEPROM dump from dashboard, Clear Crash Data from Airbag.


If you have bought FVDI Mitsubishi whole package, you want to buy FVDI ford software, and add this ford software to your mitsubishi software, then use can use your device to work on mitsubishi and ford models. How to do this?


1 Every device has the serial number. After you make payment for Ford software. Please give the serial number of your device to us. We will send it to factory and let them to produced the ford software based on your device. Then send the new software CD to you.


2 After you get the CD, install the software, then follow the following way to update your tool

1) Connect the hardware of FVDI with your computer via USB cable. (No need to connect it with your car)

2) Insert the CD to your computer. Find this CD on your computer, open folder “FW Downloader”,  then doble click “FWDownloader.exe”, then this software will fun automaticlly.


3) Then you will see two options: If you want to update the firmware. Then choose "Firmware". If you want to update license data, then choose "Database".



4) Click button “Start” to start updating


5) After updating ready, click "Exit".


Then new models is added ready.

Perhaps you also interested in the following articles
2015 FVDI ABRITES V6.3 free software and video on Win 7 32bit
Johnson Control BSI goes into bootmode not killed by FVDI
SVDI VAG commander error solution and technical support

08:54 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


Solution for Kess V2 4.036 gray buttons and NXP banned

Problem one:

Mine KESS v2 4.036 there are eight tokens, but the program does not work... All buttons gray. I bought token resetter software, but it does not help. Each number is OK. Yesterday he worked, he wrote that there are only nine tokens then 8 tokens... Today it did not work.

Kess problem-01.jpg

Kess problem_2.jpg

Working solution: 

Install ksuite 2.07, you will be able to use the 8 token left.


New Problem:

Resetter I bought was a scam; I ended up putting NXP in banned state.

Kess problem_3.jpg

Kess problem_4.jpg

Working solution options:

1)4.037 is gone on, nxp is reseter will work...need exchange nxp. 

2)Senior tunner’s successful experience: I save many tools with V4.036 and grey section, and without change LPC.

3)Another tunner’s successful experience: I have delete folder ksuite 2.08, then format the card on kessv2 and rewrite the folder of car for ksuite 2.08, now the interface work ok.


Finally, I changed my NXP, updated, and my kess v2 works again...

11:09 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


Ford VCM2 IDS for Ford Mazda 2-in-1 communication failed

2015 new Ford VCMII diagnostic scanner for Ford (IDS V96) and Mazda (IDS V95) 2-in-1 communication failed problem solution provided. 



One of Japanese customer has newly got the VCM2 IDS kit for Ford and Mazda (Item No: SP239-B). He followed the instruction in web package to install Ford IDS v96, but error occurs when connecting the VCM2 kit with vehicle, the system said no USB drivers detected. The indicator on VCM main unit flashed, the system detected the USB Serial Convertor deriver, but still cannot communicate with vehicle. Error screenshots taken below:




Possible reason:

Did not install VCM 2 IDS USB driver correctly/completely.



Un-install the software and install VCM2 USB driver software again. 


Installation tips:

1) Ford and Mazda 2-in-1 VCM2 scanner support vehicle from 1996 to 2014 and part of 2015.

2) This VCM II has the same working method as VXDIAG VCX NANO ford and mazda 2 in 1 scanner (item number SP239). 

3) Ford and Mazda software can be installed on the same laptop if runs on VMware.

4) Ford and Mazda software can not be installed on same laptop if runs on Win XP laptop. 

5) Ford IDS software installation is slightly different from Mazda IDS installation. 


Follow video installation guide here:

How to install Ford & Mazda VCM2 2-in-1 Ford IDS V96 software


How to install Ford & Mazda VCM2 2-in-1 Mazda IDS V95 software


How to setup VMware for VXDIAG VCX NANO Ford/Mazda 2 in 1

09:17 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)