topblog Ivoire blogs

25/07/2017

BMW X3 E83 Steering Angle Learning by Launch X431V pro

 Post Topic: step – by -step procedure on how to do bmw x3 e83 steering angle learning with Launch x431 v diagnostic tablet.

 

Tools to prepare:Launch X431 pro 

 

Launch X431 pro function:

 

After the replacement of steering angle sensor, it is necessary to encode the steering angle sensor, then adjust it.

Launch X431 pro

 

 

Operation procedure:

Select Manually select-> x series-> x3_e83-> chassis

launch-x431-v-steering-angle-learning-on-BWM-X3 (1)

 

Enter ABS (anti-lock brake system-dsc) system

launch-x431-v-steering-angle-learning-on-BWM-X3 (2)

 

Select Special function

launch-x431-v-steering-angle-learning-on-BWM-X3 (3)

 

Check the ECU IDENTITY

launch-x431-v-steering-angle-learning-on-BWM-X3 (4)

 

Select Steering angle learning

launch-x431-v-steering-angle-learning-on-BWM-X3 (5)

 

The steering angle must be calibrated as reference

launch-x431-v-steering-angle-learning-on-BWM-X3 (6)

 

After successful calibration, it prompts the info as below

launch-x431-v-steering-angle-learning-on-BWM-X3 (7)

 

The end of test module

launch-x431-v-steering-angle-learning-on-BWM-X3 (8)

 

 

08:20 Publié dans Blog, Shopping, Web | Tags : launch x431 v | Lien permanent | Commentaires (0)

18/07/2017

How to use BDM frame with adapters set

It’s used to update/flash ECUs, writeECM modified and programProbe holder/Dimsport aids.

The frame can work with ECM Chip Tuning Tools such as KESSKTAGFGTECHBDM 100KTM100CMD, DIMSPORT AIDS...

 

This set includes: aluminum alloy support pair, acrylic sheet (LED lamp and interface),BDM probes 4, wire 4

 

ktag-bdm-frame-led-2 ktag-bdm-frame-led-3

How to use the BDM frame aluminium:

Insert the probe to connect the BOOT on the ECU board and CNF1, the legend for the public MED17.5.2 computer board.

ktag-bdm-frame-led-4

 

Applicable to open the ECU, to avoid welding jumper. In the acrylic board with LED light bar, help the case of poor light to see the hole of the board.

ktag-bdm-frame-led-5

Jumper for the plug-in, to reduce the trouble of welding the connection, easy to connect, and can be more than a series.

ktag-bdm-frame-led-6

LED power situation, the whole board can see clearly. LED power supply with ECU equipment with 12V power supply, connect the probe, you can disconnect the power supply, to the equipment for the

ktag-bdm-frame-led-7

The new LED light bar interface is fixed on the acrylic plate, for the straight type.

ktag-bdm-frame-led-8

Add a LED light to facilitate the case of poor light to see the computer board, the picture on the LED lights may be updated at any time, only for more practical.

ktag-bdm-frame-led-9

The tip of the probe is specially designed and scalable.

ktag-bdm-frame-led-10

 

How does the BDM frame work with ECU programmers:

Here, how to work with Ktag 7.020:

ktag-bdm-frame

 

 

How to use BDM frame with adapters set

It’s used to update/flash ECUs, writeECM modified and programProbe holder/Dimsport aids.

The frame can work with ECM Chip Tuning Tools such as KESSKTAGFGTECHBDM 100KTM100CMD, DIMSPORT AIDS...

 

This set includes: aluminum alloy support pair, acrylic sheet (LED lamp and interface),BDM probes 4, wire 4

 

ktag-bdm-frame-led-2 ktag-bdm-frame-led-3

How to use the BDM frame aluminium:

Insert the probe to connect the BOOT on the ECU board and CNF1, the legend for the public MED17.5.2 computer board.

ktag-bdm-frame-led-4

 

Applicable to open the ECU, to avoid welding jumper. In the acrylic board with LED light bar, help the case of poor light to see the hole of the board.

ktag-bdm-frame-led-5

Jumper for the plug-in, to reduce the trouble of welding the connection, easy to connect, and can be more than a series.

ktag-bdm-frame-led-6

LED power situation, the whole board can see clearly. LED power supply with ECU equipment with 12V power supply, connect the probe, you can disconnect the power supply, to the equipment for the

ktag-bdm-frame-led-7

The new LED light bar interface is fixed on the acrylic plate, for the straight type.

ktag-bdm-frame-led-8

Add a LED light to facilitate the case of poor light to see the computer board, the picture on the LED lights may be updated at any time, only for more practical.

ktag-bdm-frame-led-9

The tip of the probe is specially designed and scalable.

ktag-bdm-frame-led-10

 

How does the BDM frame work with ECU programmers:

Here, how to work with Ktag 7.020:

ktag-bdm-frame