topblog Ivoire blogs

07/08/2017

VXDIAG VCX NANO FordECU Programming Online: Success

This is Ford IDS Online Programming Service, incl. how to register an programming account , what kind of Ford diagnostic tool should use and how to use it for Ford ECU programming online. Hope this write-up helps.

 

 

Go to J2534 Programming

Http://www.motorcraftservice.com/ FORD Motorcraft Service

The official site to register my account

 

 

 

 

 

Online programming account only

 

Have good success on 2005 Ford Escape 3.0 V6

 

PCM programming online zero issues!!!

 

 

P.S, tips i followed:

 

How to do FORD PCM PROGRAMMING:

 

scope & scan scopes PCM Ford PCM vehicle diagnostics repair shop training technician training automotive aftermarket

Programming Ford electronic control units (ECUs) is pretty straightforward and simple compared to many other OEMs. However, Ford does do one thing differently than most other OEMs. The normal Ford programming procedure has you “inhale” (read and store) the As Built data from the old ECU to the scan tool so that these As Built vehicle specific production and calibration details can then be transferred to a new, remanufactured or salvaged ECU you are installing.

A complication arises when you are attempting to replace an ECU that is dead or not communicating with the scan tool or programming device. In this instance, you are going to have to use a different method of telling the replacement ECU what the needed As Built data information should be. The Ford recommended procedure for this is stated as:

“Programmable Module Installation (PMI) must be performed when replacing module. If the information cannot be inhaled from the original module, As-built data must be used to properly configure module”

This procedure requires purchasing a per use subscription for all ECUs, except the PCM, from the Ford Motorcraft website, http://www.motorcraftservice.com. Once purchased you use the vehicle identification number (VIN) to acquire the As Built data for the particular ECU you are replacing. This As Built data is actually multiple lines of hexadecimal numbers entered into dialogue boxes in the programming software. We will describe this process for Ford ECUs in next month’s column. For this months column we will describe a quicker method than acquiring the As Built hex info to install a replacement powertrain control module (PCM) in a Ford vehicle where the old PCM is damaged and not communicating. All we need do is tell a little white lie to the scan tool or programming device!

To accomplish this trick, connect your Ford diagnostic toolor Flash programming device to the diagnostic link connector (DLC). Leave the ignition key in the OFF position. While the key is off, attempt to connect with the vehicle using your tool’s software. The programming software will show a status bar for 45 seconds while it attempts communication with the vehicle. Of course, the communication attempt will fail because the key is off! It will then ask you to turn the key off and on again as it again attempts to communicate with the vehicle. After this process completes the software will ask you if you want to make another attempt. Choose no to this query.

You are then asked to choose from a list of vehicles to communicate with. Typically, your choice on this page will be “all other” shown on the top of the list as the rest of the list are non-domestic vehicle models

.

ford-pcm-programming-service-vxdiag-vcx-nano-1

 

The software will explain that you must provide some numbers from the actual ID label on the old PCM in order for the software to identify the vehicle you intend to communicate with. Use the actual PCM’s label shown here if Figure 1 to gain the information you need. As you can see in screen shot shown in Figure 2, there are three sets of data fields you can use. You need only use one of these data fields to get the job done. I use the Tear Tag number because it is the easiest. In our example, we take the YPZ2 shown on the PCM label in figure 1 and type it into the Tear Tag data field as shown in Figure 2.

ford-pcm-programming-service-vxdiag-vcx-nano-2

 

The next screen shown will ask you to enter the VIN and mileage. This VIN information is important if your state has an OBDII inspection program requiring a VIN read from the DLC for positive vehicle identification purposes so do not skip this step.

Once the vehicle is properly identified as shown in Figure 3, you can use the normal PCM replace and program procedure. You may be asked to provide a couple of other pieces of information like tire size or whether the vehicle has four-wheel drive or not.

ford-pcm-programming-service-vxdiag-vcx-nano-3

 

You also might need to perform a reset or relearn of the PATS vehicle security system if the vehicle is so equipped. This might require the presence of two transponder type security keys depending on the system the vehicle is equipped with. You can find this information for your particular vehicle as well as the methods needed to program the PATS security system by using the free downloadable guide located at http://www.motorcraftservice.com/vdirs/retail/pats_job_aid.pdf

 

 

 

 

 

 

 

 

03/08/2017

2017 Tech2Win PCMCIA V182 Multi-Language Download Free

2017 Tech2Win multilingual free download inlcl. Spanish English German French Italy Dutch version…

 

Free download Opel Tech2Win PCMCIA V182 Spanish:

Password:mhhauto.com

 

Free download Tech2win 32MB PCMCIA Card V182.000 English:

Part 2:

Password: mhhauto

 

Download Tech2Win PCMCIA 32GB Card Bin Files Multi-Language (EN; DE; FR; IT):

 

For all files above

Work on Tech2win only

NEVER TESTED by professionals

 

To avoid SECURITY issues, please go to http://www.obdexpress.co.uk/wholesale/tech2-diagnostic-sc...

It’s tested and 100% working with Tech2 scan tools

 

Tested software includes:

Tech2Win GM      English 32.007

Tech2Win SAAB    English 148

Tech2Win OPEL    English 165 (Cars from 1997-2014)

Tech2Win Holden   English 149 (Cars from 1999-2013)

Tech2Win SUZUKI  English  01.210.020

Tech2Win ISUZU    English  K line 11.53;

Tech2Win ISUZU    English  CAN line 107.021

 

For 12V CARs only (no trucks)!!!

Diagnostics: cars from 1991 to 2013

Programming with TIS2000: cars before the 2007 year

 

(You are taking risk when programming a car, so it’s 100% necessary to use a 100% working software. For TIS2000 untested, forget it. HIGH RISK! Google “Tech2 TIS2000”… OBDexpress.co.uk  might be a good place to start…Tested TIS2000 for $20 around.)

 

GM

GM-English         32.007 1991-2013

GM-Germany      32.007  1991-2013

GM-Spanish       31.007   1991-2013

OPEL

OPEL-English     V180      1997-2014

OPEL-Italian       133.001 1997-2012

OPEL-Germany  85.001 1997-2008

OPEL-Spanish   91.001 1997-2009

SUZUKI

SUZUKI-English   01.210.020

SAAB

SAAB-English     148.000

ISUZU

ISUZU-English   CAN-BUS 107.021  2010-

ISUZU-English   K-Line  11.62   1996-2013  (new add)

Holden

HOLDEN-English V149 1999-2013

 

 

Here are FAQs maybe helpful for some one. Enjoy!

 

How to get this bin file to work ?? I have tech2win working but dont know where to copy this bin file into….??

 

open TECH2WIN> select option Modify/View > choose quickstart > and look to Slot 0: Memory card image location

You can change your image with this or make new configuration

 

OR

Just rename this bin file Quickstart.bin and swap it with your old one .

 

 

How the hell to combine the files back to 1 bin file??

 

Extract with winrar it should then extract has 1 file

winrar should combine all parts

 

How to load software on a 32GB card on a Tech2 scanner?

 

Insert tech2 card into pcmcia port on laptop and use mce to write the required bin to card, once done remove card and place in tech 2 and power on.

Tech2 card writer is one of them but the method is much slower then reprogramming in pcmcia slot. Tech2 card writer can be downloaded free below as well.

Source:

04:44 Publié dans Blog | Tags : tech2win | Lien permanent | Commentaires (0)

01/08/2017

Ford IDS v86 v100 v101 Ride Height Calibration on Lincoln Navigator 2004

Test reports: Vxdiag vcx nano Ford on Lincoln Navigator 2004

 

Purpose: Ride Height Calibration

 

Vehicle specification:

Vehicle: NAV

Engine type: 4V

Capacity: 5.4L

Transmission: Automatic

Fuel type: Gasoline

Emission level: Federal Emission

 

Ford diagnostic tool:Allscanner VXDIAG VCX NANO Ford

 

Diagnostic system: Ford IDS v86 v100 v101

 

Procedure: How to use Vxdiag Ford for Ride Height Calibration

Turn the ignition to the ON position

Exit the vehicle, close all doors and allow…to kneel height (approx. 45 seconds)

With the ignition ON…into DRIVE and then back into PARK

Exit the vehicle, close all doors…to trim height

(approx. 45 seconds)

Open the left front door

Measure the ride height

On the following screen, adjust the ride height and then save the newly calibrated values (while outside the vehicle)

 

Test result:

Ford IDS v86 Ride Height Calibration on Navigator 2004: Failed

Ford IDS v100 Ride Height Calibration on Navigator 2004: Failed

Ford IDS v101 Ride Height Calibration on Navigator 2004: Failed

 

Vxdiag vcx nano Ford cannot supportLincoln Navigator 2004

 

Error: testman error. Record these numbers: 12 50 331069

ford-ids-101-Ride-Height-Calibration-Lincoln-Navigator-2004-1

 

Error: testman error. Record these numbers: 12 50 8928

ford-ids-101-Ride-Height-Calibration-Lincoln-Navigator-2004-2

 

Error: testman error. Record these numbers: 12 56 253662

ford-ids-101-Ride-Height-Calibration-Lincoln-Navigator-2004-3

 

 

11:08 Publié dans Blog, Web | Tags : ford ids | Lien permanent | Commentaires (0)