topblog Ivoire blogs


BMW Key Programmer BMW AK90+ II Vs. BMW AK90+

BMW AK90+ II new update: can read key info on new Porsche and new BMW, BMW E/F series key renew functions etc. What's more new when comparing with BMW AK90+? go on reading the following parts.


  1. BMW AK90+ II : BMW EWS + CAS4/CAS4+/ new Porsche (1995-2005)

Version: V3.19

Workable BMW system:

EWS2.1/EWS2.2/EWS3/EWS3.3/EWS4/EWS4.4 from 1995-2005 ...Yes

New BMW F series CAS4/CAS4+/ new Porsche ...Yes



BMW E series PCF7945 chip ...Yes


The original factory PCF7953 chip refresh function (restore to a new key state) ...Yes


New BMW F series CAS4/CAS4+/ new Porsche: adds key information identification function.


Support reading frame number, key state, KM data.


Covers all BMW EWS reading the key information;

Some of EWS reading and writing speed is improved;


BMW AK90+ II is safe and effective



Disassemble the chip: No need (safe and efficient)

BMW AK90+ II functions

  1. Directly reading data dumps from MCU which marked 1D47J,2D47J,0D46J,2L86D without removing MCU from circuit board, easy to do yourself.
    2. With the help of software you can change VIN, Mileage and renew, lock or unlock keys as well.
    3. Programming original chips "EML 10030A" for making keys .
    4. Identifying keys for all EWS ,showing VIN, key No. and mileage .


AK90+ II Image source

You can see the package includes one piece of AK90+ II Host, AK90+ II 6 Pin Cable, AK90+ II Chip data to read specific seat, AK90+ II software CD-ROM, AK90+ II USB communication cable etc.


  1. BMW AK90+: BMW EWS (1995 -2005)

Workable BMW system: EWS2.1/EWS2.2/EWS3/EWS3.3/EWS4/EWS4.4 from 1995-2005.

Current software: V3.19
Language: English, Chinese

OS: WinXP, Win7


BMW AK90+ features:

-Support all EWS system and MCU safety from reading and writing.
-Support all BMW EWS2.1/EWS2.2/EWS3/EWS3.3/EWS4/EWS4.4
-Support 0D46J/1D47J/2D47J (encryption)/2L86D safe online reading and writing.
-Support read and write PCF7930/PCF7935/10030A.
-Support read all BMW (including all BMW EWS/CAS the system key 1995-2005)


BMW AK90+ functions:

  1. Directly reading data dumps from MCU which marked 1D47J , 2D47J , 0D46J ,2L86D without removing MCU from circuit board , easy to do yourself.
    2. With the help of software you can renew , lock or unlock keys as well.
    3. Programming original chips "EML 10030A" for making keys .
    4. Identifying keys for all EWS and CAS , showing VIN , key No. It can change VIN, can change mileage in ews.
    5. CPU reads and writes and the RF chip read and write operations are done by one instrument, you do not need other auxiliary instruments


AK90+ Image source

As you can see the package includes AK90 Host, AK90 10 Pin Cable, AK90-Chip data to read specific seat, AK90 V3.19 software CD-ROM, AK90 USB communication cable.

To sum up:

AK90+ covers all BMW EWS system from 1995 to 2005 year, it comes with 10pin cable.

AK90+ II covers all BMW EWS system, adds new BMW F series CAS4/CAS4+/ and new Porsche from 1995 - 2009 year, the package comes with 6 Pin Cable.




03:29 Publié dans Blog | Tags : bmw ak90+ ii | Lien permanent | Commentaires (0)



Here is the user manual of how to how Allscanner VXDIAG VCX NANO GM + TIS2000 for SPS

IT works!! ok for anyone trying to use the VXDIAG GM nano with SPS this is what you need to do (order is important):

*** please note you cannot use the VM that the VXDIAG package comes with (GDS2 VM). It’s configured in such a way it won’t work with the dongle crack and caused me a lot of head scratching to find this out.

  1. Create a windows XP 32bit VM using VMWare Player
  2. Make sure you add an LPT port (set to auto, not connected on startup). It doesn’t matter if your actual PC has an LPT port or not this is needed for the dongle crack later.
  3. Install VMWare tools for your VM
  4. After you have the windows VM up and running install the BOSH MDI drivers found here:…-and-mdi-2(the MDI drivers on the driver disk and vxmanager installer wouldn’t install on my xp 32bit VM but the one from bosh does).
  5. From the driver disk or from install the VXDIAG MDI package with pass thru driver (VXDIAG MDI manager or VXDIAG Manager)

Download tis_data_1.iso, tis_data_2.iso, GM-NAO-TIS200-3_2008.iso, TIS2000DongleCrack.rar from this: mhhauto) or buy a tested TIS2000 crack such as and the like

  1. (files / instructions in the updated.txt you may need to click the link more than once if you get an error when downloading)
  2. Mount the tis_data_1.iso in your VM (use the virtual cdrom in vmware player and attach to iso file) this will start the auto install of the TIS2000 2007.3 software)
  3. All options can be installed using the default selections however make sure you check the install checkbox above the parallel security device on the one screen.
  4. After installation is complete you can extract the TIS2000DongleCrack.rar and copy the folder to the desktop of your VM
  5. Go into the TIS2000DongleCrack folder locate the drivers folder and open it, run the DDINST32.EXE (if you get a registry error you didn’t install an LPT port in your VM), select Express and it should install the files then click ok / Exit to close.
  6. Go back to the main TIS2000DongleCrack folder and copy SCAControlUI.exe and Id.dll to c:Program Filescosidsbin (it will prompt to replace id.dll select yes).
  7. Go back to the main TIS2000DongleCrack folder into the Dongle folder and copy the 2 files in there to c:windowssystem32 (the dongle crack is now installed)
  8. Now mount the tis_data_2.iso in your VM (use the virtual cdrom in vmware player and attach to iso file) and open TIS2000 (double click the icon on your desktop) when TIS opens it will ask you if you want to upgrade click yes.
  9. After the upgrade completes mount the GM-NAO-TIS200-3_2008.iso in your VM (use the virtual cdrom in vmware player and attach to iso file) and open TIS2000 (double click the icon on your desktop) when TIS opens it will ask you if you want to upgrade click yes.
  10. After the upgrade completes you have successfully installed TIS2000 2008.3 and the Dongle crack, now we need to configure TIS to use the VXDIAG GM nano
  11. Open TIS2000 from the icon on your desktop, select Configuration menu from the top and select IO Management.
  12. Click the Driver button, click the Browse button, locate the j2534.dll file in the window and click open (installs the J2534 Pass Thru Driver)
  13. Now click the Add button (in IO management) enter exacly “Generic Pass Thru” in Logical Name and select “J2534 Pass Thru Driver” in the Driver drop down, click OK.
  14. Select Generic Pass Thru in the list and click Properties, in the Device Name drop down select VXDIAG, (ALLScanner) and click ok then click close to close IO Management.

Now TIS2000 software is installed and configured all you have to do is connect your VXDIAG device to the PC / VM. To do this first use a usb and connect it to the PC then in the VMWare player menu go in removable devices and connect the Future Devices USB to serial converter. At this step my windows install didn’t have the basic usb to serial drivers so I connected the VM to the network (if not connected use the VMWare player menu to connect the network) and windows downloaded them from the net and installed the device as com3. you are now good to go.

At this point you can now click on SPS in TIS2000 select Generic Pass Thru as your device and your good to program!!

Satisfied, VXDIAG VCX NANO GM device works as a clone to the GM MDI.

Credits to wizzardsl writing for the how-to’s for us.



08:29 Publié dans Blog | Tags : vxdiag vcx nano gm | Lien permanent | Commentaires (0)


How To Install ODIS-Engineering 6.7.5 WIN7

V-A-G diagnostic software ODIS engineering version ODIS-E 6.7.5 has been tested working perfectly!!!ODIS-E 6.7.5 windows 7 32 bit install manual, look here:



Step 1: Install setup assistant

Step 2: Register ODIS-E 6.7.5

Step 3: Download Postsetup

Step 4: Test ODIS Engineering 6.7.5

Step 5: Repair Bluetooth

The most important: Change the date of the computer!!!!!!!!!!!!!


Step 1: Install Setup Assistant

Change date and time

Change date to January 1st, 2017 (UTC-8:00) Pacific Time (US & Canada)

Copy 6.7.5 kg-pass 123 zip file to desktop

Extract zip file on desktop with encrypted password: 123

Delete zip file on desktop

Copy 6.75 (engineering) folder to desktop and open it

Open OffboardDiagSetup-Engineering_6_7_5

Select setup language

Install ODIS-E setup assistant

Click on Next

select Target folder

click Next

select a directory C:/ODIS-DIAG-MODULES-ENGIN

click on Next

select diagnostic interface: VAS 5054

A bluetooth pairing must be established to use the vas5054, click on Next

License file selection

search desktop->工程 6.7.5 folder->license.dat

click next

Tick create a folder in the start menu

click Next

installing Offboard Diagnostic Information System Engineering

install Microsoft Visual C++2005

Accept the windows security warning by clicking on Install

Finish install Setup assistant

Restart the computer

Step 2: Register ODIS-E 6.7.5

Delete VW-MCD-PDX-Builder file on desktop

Start-> All Program-> Offboard Diagnostic Information System Engineering folder ->Send Offboard Diagnostic Information System Engineering software to desktop

Start-> All Program->Softing D-PDU API for VCIs V1.20.037 folder->send EDIC Configuration Manager to desktop

Right click Offboard Diagnostic Information System on desktop open Properties->Open file location

Open 工程 6.7.5 folder on desktop

Copy and replace OffboardDiagLauncher on Offboard Diagnostic Information System desktop folder

Open Offboard Diagnostic Information System software on desktop

Software will require to enter registration key

Open 工程 6.7.5 folder on desktop

Open key generator

enter registration name: abc

Copy Hardware ID to key generator and click on Generate

it will generate registration key

paste the key to software Key area

click Register

Step 3: Download Postsetup

open ODIS-E postsetup

select local directory

C:/Users/AADD/Desktop/6.75 Engineering-> Database->ODIS_Engineering

if software prompt “no valid software configuration could be found”, select the  destination

C:/Users/AADD/Desktop/6.75 Engineering-> Database

click next

select Postsetup language

check postsetup version:67.5.10

Press next icon to download postsetup

download completed will launch software automatically

Step 4: Test Software

Select Admin->Diagnostic data

open C:/Users/AADD/Desktop/6.75 Engineering-> diagnostic data->AU (Audi)->ODXUPDATE

Select LB (Lamborghini, Bentley),SE (Seat),SK (Skoda),VW ODXUPDATE on by one

Connect VAS 5054a with computer by USB

Open Computer->Manager->Device Manager->Softing Vehicle Interface->VAS5054

Open EDIC Configuration Manager

Current connection is USB connection

Open Offboard Diagnostic Information System Engineering software on desktop

click on Diagnosis

Coding function

special functions, i.e ECU programming, application programming etc

Step 5:  Pair Bluetooth

Installing device driver software

device is ready

select Bluetooth icon,add a device VAS5054

enter the device pairing code: 082145725

click on Next

this driver has been successfully added to this computer

Open EDIC Configuration Manager-> Add a new device

select COM Port 4

Bluetooth connection and com port setup success.

Run ODIS-E 6.7.5 software and diagnose vehicle.


What else you may need know:

ODIS-Engineering 6.7.5 download free:

Credits to wopr: Tested… mount and select the drive letter folder… I’ve noticed many posts on the setup and key but no Postsetup Hopefully this helps. no password or anything, just doing my part to help.

Which Vas 5054a scan tool can wok with ODIS-E 6.7.5 100% OK?

It’s this :Best VAS 5054A ODIS

What are the major differences in using ODIS-S and ODIS-E?

basically, ODIS-S (Service) is for Diagnostics and ODIS-E (Engineering) is for module programming

the latest ODIS-S is 4.1.3, the latest ODIS-E is 6.7.5

Odis engineering 6.7.5 licence problem how to solve?

Change the date of the computer and change it for the first two or three months

04:30 Publié dans Blog | Tags : odis 6.7.5 | Lien permanent | Commentaires (0)