topblog Ivoire blogs

29/03/2019

How To Use Xhorse VVDI Mini Key Tool Copy ID46 Chip

Xhorse VVDI Mini Key Tool is released at OBD2eshop,it can do ID46/ID4D/ID48/ID4C/ID72/ID70 key cloning ,here is the toturial of how to copy ID46 key with Xhorse VVDI Mini Key Tool

Here we go:

Video demo:

 

Frist,

Remove cell before starting sensor copy process

In Xhorse App, connect Mini Key Tool with mobile phone

Then select Transponder Clone

Put transponder into coil

mini-key-tool-copy-id46-key-1

 

Detect transponder information, type: ID46

mini-key-tool-copy-id46-key-2

 

Follow steps below to perform ID46 online calculation

mini-key-tool-copy-id46-key-3

 

1.Put original key into coil to recognize

2.Close the antenna to the ignition switch of the car to collect

If not smart key, insert the original car key, turn on and off the ignition switch. Remove the original car key. Repeat that step until you are prompted to collect the data.

If it is a smart key, take out the smart key battery, put the smart key close to the induction area, turn on and off the ignition switch, then remove the key. Repeat that step until you are prompted to collect

mini-key-tool-copy-id46-key-4 mini-key-tool-copy-id46-key-5 mini-key-tool-copy-id46-key-6

 

Insert the original key into coil for verification

mini-key-tool-copy-id46-key-7 mini-key-tool-copy-id46-key-8

 

Query calculation result

Take out original key, put special chip or wireless remote into vvdi mini key tool

Write data

mini-key-tool-copy-id46-key-9 mini-key-tool-copy-id46-key-10

Copy key success.

Install battery to Jaguar smart key and install special chip into key shell.

Test both keys, both can start engine.

 

mini-key-tool-copy-id46-key-11 mini-key-tool-copy-id46-key-12

 

Source:http://blog.obd2eshop.com/how-to-use-xhorse-vvdi-mini-key...

03:18 Publié dans Blog | Tags : xhorse | Lien permanent | Commentaires (0)

20/11/2018

OBDSTAR X300 DP PLUS Latest IMMO Upgrade(2018-11-20)

Update new here:OBDSTAR X300 DP PLUS Latest IMMO Upgrade, Support key programing for BUICK/CADILLAC/GMC/CHEVROLET 2017-

OBD pin codde reading +key programming

No Need 20 digits authorization code

Details:

obdstar-x300-dp-plus-upgrade-2018-11-20-1

BUICK:

lacrosse 2017-

Regal 2017-

Envision 2017-

Encore 2017-

GL8(2.5L) 2017-

obdstar-x300-dp-plus-upgrade-2018-11-20-2

CADILLAC

ATS 2017-

ATSL 2017-

XTS 2018-

XTS 2017-

CT6 2017-

Escalade 2018-

 

obdstar-x300-dp-plus-upgrade-2018-11-20-3

GMC

SIERRA 2017-

YUKON 2017-

obdstar-x300-dp-plus-upgrade-2018-11-20-4

CHEVROLET

Cruze 2017-

Malibu 2017-

Malibu XL 2017-

Camaro 2016-

SILVERADO 2017-

SUBARBAN 2017-

TAHOE 2017-

 

07/11/2018

How to Fix Micropod2 Registration Error?

Here’s the working solution to wiTech Micropod 2 clone Chrysler diagnostic tool registration problem.

 

Error:

“Registration is needed

Device with serial number*** is not registered. Please check the knowledge

base to determine how to register a device”

solve-micropod2-registration-error-1

 

Solution:

 

Step1 Right click wiTech Diagnostic Application-> Properties->Open file location

solve-micropod2-registration-error-2

solve-micropod2-registration-error-3

Step2  C:/Program Files (x86)/DCC Tools/wiTECH/client , and then Open app-config text file

solve-micropod2-registration-error-4

Step3 Change the first number to any value marked red circle above.

ie change 8 to other numbers, 1-9

Then save the text file. (Very important!!!)

solve-micropod2-registration-error-5solve-micropod2-registration-error-6

 

Step4 Run Micropod2 software again

If witech still prompts  error ” an internal registration error has occurred “, just ignore by clicking no icon to close it.

 

solve-micropod2-registration-error-7
Problem solved.

 

Then tick “Offline” on the bottom left corner (Don’t need to login)

solve-micropod2-registration-error-8

www.obd2eshop.com

09:35 Publié dans Blog | Tags : witech micropod 2 | Lien permanent | Commentaires (0)